jaredsimmons

ok i need a little help here, and yes i did a search im kinda new to rotarys and ive only had this one for about a week. anyways my engine light flashes when im under medium acceleration and stops under no throttle or full throttle. when i ran my codes i got a 13 and im thinking a 30 it was just 3 long flashes. when i checked what they mean it was an intake manifold pressure sensor (13) and solenoid split air valve (30). my only problem is i dont know where these are located or how to check them, any help would be greatly appreciated. thanks

drunkin_idiot

The manifold air pressure sensor or Map sensor is located on the passengerside strut tower, to see if its bad, get a multimeter and test the resistance on it.

jaredsimmons

thanks man ill do that today. any clue about the other thing?

Dramon_Killer

http://www.fc3spro.com/TECH/HOWTO/ERRORCOD...UKI/kerror.html



- Ted

Dramon_Killer

btw the solenoid thing, is on your rats nest.

jaredsimmons

got to looking at the connector on the map sensor and there are two wires im wanting to say brown with a green tracer, i cant remember exactly, that go into the same connector is that correct? i see 4 "hookups" on the sensor but im only using 3 of these, is that right? and ill check out that solenoid on the rats nest tommorow. thanks.

drunkin_idiot

It should be a 3 prong connector.