Dr. Rotaryman88
#12
Originally Posted by 13BAce' date='May 30 2002, 05:16 PM
[quote name='vosko' date='May 30 2002, 07:13 PM'][quote name='13BAce' date='May 30 2002, 04:09 PM'][quote name='vosko' date='May 30 2002, 05:55 PM']turborotors engine was an atkins rebuild.... the front rotor bearing broke! if your gonna spend the money go with http://www.pineappleracing.com . heard nothing but excellent things from them
well he drag raced it but our guess is the reused the bearings maybe that one had high mileage on it. who knows [/quote]
Did it break or did he just spin it?[/quote]
it broke. when the engine ran RAK RAK RAK RAK. it sounded nasty! ito confirmed it too
#13
Originally Posted by Rotaryman88' date='May 31 2002, 09:41 PM
Yea, I've heard good things about Pineapple racing, and looked them up a lil while ago...I'll probably contact them within the next few days. I'm from Virginia...nowhere near Washington, lol....
#14
Originally Posted by vosko' date='Jun 1 2002, 10:14 AM
[quote name='13BAce' date='May 30 2002, 05:16 PM'][quote name='vosko' date='May 30 2002, 07:13 PM'][quote name='13BAce' date='May 30 2002, 04:09 PM'][quote name='vosko' date='May 30 2002, 05:55 PM']turborotors engine was an atkins rebuild.... the front rotor bearing broke! if your gonna spend the money go with http://www.pineappleracing.com . heard nothing but excellent things from them
well he drag raced it but our guess is the reused the bearings maybe that one had high mileage on it. who knows [/quote]
Did it break or did he just spin it?[/quote]
it broke. when the engine ran RAK RAK RAK RAK. it sounded nasty! ito confirmed it too [/quote]
Either the bearing was defective, there was an oil problem, or the motor was over revved.
#15
Originally Posted by 13BAce' date='Jun 1 2002, 08:57 AM
[quote name='vosko' date='Jun 1 2002, 10:14 AM'][quote name='13BAce' date='May 30 2002, 05:16 PM'][quote name='vosko' date='May 30 2002, 07:13 PM'][quote name='13BAce' date='May 30 2002, 04:09 PM'][quote name='vosko' date='May 30 2002, 05:55 PM']turborotors engine was an atkins rebuild.... the front rotor bearing broke! if your gonna spend the money go with http://www.pineappleracing.com . heard nothing but excellent things from them
well he drag raced it but our guess is the reused the bearings maybe that one had high mileage on it. who knows [/quote]
Did it break or did he just spin it?[/quote]
it broke. when the engine ran RAK RAK RAK RAK. it sounded nasty! ito confirmed it too [/quote]
Either the bearing was defective, there was an oil problem, or the motor was over revved.[/quote]
he thinks he might of over revved it on the burnout with the haltech rpm limit set to 16000 rpm
#16
Originally Posted by vosko' date='Jun 1 2002, 11:13 AM
[quote name='13BAce' date='Jun 1 2002, 08:57 AM'][quote name='vosko' date='Jun 1 2002, 10:14 AM'][quote name='13BAce' date='May 30 2002, 05:16 PM'][quote name='vosko' date='May 30 2002, 07:13 PM'][quote name='13BAce' date='May 30 2002, 04:09 PM'][quote name='vosko' date='May 30 2002, 05:55 PM']turborotors engine was an atkins rebuild.... the front rotor bearing broke! if your gonna spend the money go with http://www.pineappleracing.com . heard nothing but excellent things from them
well he drag raced it but our guess is the reused the bearings maybe that one had high mileage on it. who knows [/quote]
Did it break or did he just spin it?[/quote]
it broke. when the engine ran RAK RAK RAK RAK. it sounded nasty! ito confirmed it too [/quote]
Either the bearing was defective, there was an oil problem, or the motor was over revved.[/quote]
he thinks he might of over revved it on the burnout with the haltech rpm limit set to 16000 rpm [/quote]
Yeah, everybody always likes to blame the engine builder. Stock bearing won't handle much more than 8500-9000.
#17
Originally Posted by 13BAce' date='Jun 1 2002, 10:26 AM
[quote name='vosko' date='Jun 1 2002, 11:13 AM'][quote name='13BAce' date='Jun 1 2002, 08:57 AM'][quote name='vosko' date='Jun 1 2002, 10:14 AM'][quote name='13BAce' date='May 30 2002, 05:16 PM'][quote name='vosko' date='May 30 2002, 07:13 PM'][quote name='13BAce' date='May 30 2002, 04:09 PM'][quote name='vosko' date='May 30 2002, 05:55 PM']turborotors engine was an atkins rebuild.... the front rotor bearing broke! if your gonna spend the money go with http://www.pineappleracing.com . heard nothing but excellent things from them
well he drag raced it but our guess is the reused the bearings maybe that one had high mileage on it. who knows [/quote]
Did it break or did he just spin it?[/quote]
it broke. when the engine ran RAK RAK RAK RAK. it sounded nasty! ito confirmed it too [/quote]
Either the bearing was defective, there was an oil problem, or the motor was over revved.[/quote]
he thinks he might of over revved it on the burnout with the haltech rpm limit set to 16000 rpm [/quote]
Yeah, everybody always likes to blame the engine builder. Stock bearing won't handle much more than 8500-9000.[/quote]
well, a few people have had bearings go in atkins rebuilds...... :unsure:
#18
Originally Posted by vosko' date='Jun 1 2002, 12:36 PM
[quote name='13BAce' date='Jun 1 2002, 10:26 AM'][quote name='vosko' date='Jun 1 2002, 11:13 AM'][quote name='13BAce' date='Jun 1 2002, 08:57 AM'][quote name='vosko' date='Jun 1 2002, 10:14 AM'][quote name='13BAce' date='May 30 2002, 05:16 PM'][quote name='vosko' date='May 30 2002, 07:13 PM'][quote name='13BAce' date='May 30 2002, 04:09 PM'][quote name='vosko' date='May 30 2002, 05:55 PM']turborotors engine was an atkins rebuild.... the front rotor bearing broke! if your gonna spend the money go with http://www.pineappleracing.com . heard nothing but excellent things from them
well he drag raced it but our guess is the reused the bearings maybe that one had high mileage on it. who knows [/quote]
Did it break or did he just spin it?[/quote]
it broke. when the engine ran RAK RAK RAK RAK. it sounded nasty! ito confirmed it too [/quote]
Either the bearing was defective, there was an oil problem, or the motor was over revved.[/quote]
he thinks he might of over revved it on the burnout with the haltech rpm limit set to 16000 rpm [/quote]
Yeah, everybody always likes to blame the engine builder. Stock bearing won't handle much more than 8500-9000.[/quote]
well, a few people have had bearings go in atkins rebuilds...... :unsure:[/quote]
If they put new bearings in the motor then it would require an extended break in period. Did they tell him exactly what they replaced?
#19
Originally Posted by 13BAce' date='Jun 1 2002, 10:54 AM
[quote name='vosko' date='Jun 1 2002, 12:36 PM'][quote name='13BAce' date='Jun 1 2002, 10:26 AM'][quote name='vosko' date='Jun 1 2002, 11:13 AM'][quote name='13BAce' date='Jun 1 2002, 08:57 AM'][quote name='vosko' date='Jun 1 2002, 10:14 AM'][quote name='13BAce' date='May 30 2002, 05:16 PM'][quote name='vosko' date='May 30 2002, 07:13 PM'][quote name='13BAce' date='May 30 2002, 04:09 PM'][quote name='vosko' date='May 30 2002, 05:55 PM']turborotors engine was an atkins rebuild.... the front rotor bearing broke! if your gonna spend the money go with http://www.pineappleracing.com . heard nothing but excellent things from them
well he drag raced it but our guess is the reused the bearings maybe that one had high mileage on it. who knows [/quote]
Did it break or did he just spin it?[/quote]
it broke. when the engine ran RAK RAK RAK RAK. it sounded nasty! ito confirmed it too [/quote]
Either the bearing was defective, there was an oil problem, or the motor was over revved.[/quote]
he thinks he might of over revved it on the burnout with the haltech rpm limit set to 16000 rpm [/quote]
Yeah, everybody always likes to blame the engine builder. Stock bearing won't handle much more than 8500-9000.[/quote]
well, a few people have had bearings go in atkins rebuilds...... :unsure:[/quote]
If they put new bearings in the motor then it would require an extended break in period. Did they tell him exactly what they replaced?[/quote]
nope he ordered the new engine not exactly knowing what he was getting it was a long time ago
#20
Originally Posted by vosko' date='Jun 1 2002, 01:09 PM
[quote name='13BAce' date='Jun 1 2002, 10:54 AM'][quote name='vosko' date='Jun 1 2002, 12:36 PM'][quote name='13BAce' date='Jun 1 2002, 10:26 AM'][quote name='vosko' date='Jun 1 2002, 11:13 AM'][quote name='13BAce' date='Jun 1 2002, 08:57 AM'][quote name='vosko' date='Jun 1 2002, 10:14 AM'][quote name='13BAce' date='May 30 2002, 05:16 PM'][quote name='vosko' date='May 30 2002, 07:13 PM'][quote name='13BAce' date='May 30 2002, 04:09 PM'][quote name='vosko' date='May 30 2002, 05:55 PM']turborotors engine was an atkins rebuild.... the front rotor bearing broke! if your gonna spend the money go with http://www.pineappleracing.com . heard nothing but excellent things from them
well he drag raced it but our guess is the reused the bearings maybe that one had high mileage on it. who knows [/quote]
Did it break or did he just spin it?[/quote]
it broke. when the engine ran RAK RAK RAK RAK. it sounded nasty! ito confirmed it too [/quote]
Either the bearing was defective, there was an oil problem, or the motor was over revved.[/quote]
he thinks he might of over revved it on the burnout with the haltech rpm limit set to 16000 rpm [/quote]
Yeah, everybody always likes to blame the engine builder. Stock bearing won't handle much more than 8500-9000.[/quote]
well, a few people have had bearings go in atkins rebuilds...... :unsure:[/quote]
If they put new bearings in the motor then it would require an extended break in period. Did they tell him exactly what they replaced?[/quote]
nope he ordered the new engine not exactly knowing what he was getting it was a long time ago[/quote]
I've seen that they sell rebuild kits with new rotor bearings. Using new rotor bearings with used rotors isn't the greatest thing and can require an extended break-in. I'm just trying to figure out why it went bad because I'm curious. I always see so many "mysterious" engine failures, like my friend's which has blown 3 times since November.