NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   ding dong the bitch is dead (https://www.nopistons.com/2nd-generation-specific-17/ding-dong-bitch-dead-2951/)

n2audio77 06-11-2002 08:09 PM

well i have finally found out why my motor died and will not start up.....after a week of trying to figure out why i could never get it to start i have found out why. first i tried a compression test and was reading well----90-95 psi and three even bounces, everything looked good-----however, when i connected an air line to the spark plug hole and set pressure at 100 psi at the compressor i had air blowing all the way through past the intake..... :( so i started calling around and found that i can get a used engine out of texas with about 60-70k miles on it for around a thousand or a mazda crate motor for 2 thousand so i think im just going to go for the new engine.

many many many thanks to all of you that have tried helping me to get my baby going again

1Revvin7 06-11-2002 08:41 PM

man that sucks, happened to me to, instead of just the usuall im going boost. man its going to take a lot of time though.

kimo3 06-11-2002 11:13 PM

well if you are getting a reman eng. why not go all the way and get some mods do to, who are you getting the engine from? You can have a StageII streetpor done for about 300 more. Just something to think about

13BAce 06-12-2002 12:46 PM

The motors from Mazda are pretty good. I have one in the 91 coupe, and it has been doing very well. If you're not going to do any major modifications to the car then it's a good option.

vosko 06-12-2002 01:02 PM

my 89 GTU had a MANA(mazda) rebuilt in it when i got it. i never had a problem with the engine just electronics etc. i also chose to beat my car to death which was very fun. shifting at 8400 rpm just ask 13BAce https://www.nopistons.com/forums/pub...>/rolleyes.gif

13BAce 06-12-2002 01:29 PM


Originally Posted by vosko' date='Jun 12 2002, 03:02 PM
my 89 GTU had a MANA(mazda) rebuilt in it when i got it. i never had a problem with the engine just electronics etc. i also chose to beat my car to death which was very fun. shifting at 8400 rpm just ask 13BAce https://www.nopistons.com/forums/pub...>/rolleyes.gif

Yeah, I would say that you were revving that high. I would never take my car that high. https://www.nopistons.com/forums/pub...>/rolleyes.gif

SoniX 06-12-2002 03:23 PM

at first I thought, "big deal, I shift that high in normal driving, then I realized, your tach only goes to 8k, my redline starts then. ahhh, sometimes N/A isn't all that bad https://www.nopistons.com/forums/pub...#>/biggrin.png

n2audio77 06-13-2002 06:24 AM

im getting the motor from the local dealership---this car is for sound so i wont be doing much in the way of mods to this car since i have a 300 lbs box and audio equip. but if i can just find a nice tII ae..............


All times are GMT -5. The time now is 04:52 AM.


© 2024 MH Sub I, LLC dba Internet Brands