2nd Generation Specific 1986-1992 Discussion

A Couple Things For Cold Weather

Thread Tools
 
Search this Thread
 
Old 11-25-2003, 10:30 AM
  #1  
Super Moderator
Thread Starter
 
Baldy's Avatar
 
Join Date: Sep 2002
Location: Tallahassee, FL
Posts: 5,425
Default

I did the TB mod awhile back. I'm wondering if this is the same for everyone else. It does this no matter what the weather is like, but worse in cold. When I start it up first time in the day, and after sitting for most of the day, if I don't keep my foot on the gas, it shuts off. It seems like I have to do this for at least a solid minute, and that's in hot weather. Does your car have the TB mod, and shut off when not warmed up?



Also, my defrost vents don't line up with the holes in the dash. I removed my dash awhile back, but I don't remember how things are attached back there. Do I have to remove my dash to get them to line up?

dash removal=bad
Baldy is offline  
Old 11-25-2003, 05:00 PM
  #2  
Senior Member
 
Travisty's Avatar
 
Join Date: Jul 2002
Posts: 331
Default

used to happen in my gxl.

i think it was a small vacuum leak if i remember correctly.
Travisty is offline  
Old 11-25-2003, 06:37 PM
  #3  
Senior Member
 
Dramon_Killer's Avatar
 
Join Date: May 2003
Posts: 1,784
Default

Yeah i have to hold the gas for about 30 seconds on my car.



Also baldy your postcount is exactly at 1337 after this post.
Dramon_Killer is offline  
Old 11-25-2003, 07:22 PM
  #4  
Senior Member
 
SPD Racing FC's Avatar
 
Join Date: Sep 2003
Location: San Diego
Posts: 595
Default

after i did the tb mod , it won't idle when cold.
SPD Racing FC is offline  
Old 11-25-2003, 08:16 PM
  #5  
Senior Member
 
RX7 13B 4 UR AZZ's Avatar
 
Join Date: Feb 2003
Location: Miami, Florida
Posts: 1,591
Default

mine shuts off when cold then holds perfect idel when warm but then again my preassure sensor is disconected and the nipple where it should be is sucking in air. I have a forced vacume leak to keep my car at a perfect idel.
RX7 13B 4 UR AZZ is offline  
Old 11-25-2003, 09:12 PM
  #6  
Senior Member
 
Rotaryman88's Avatar
 
Join Date: Aug 2001
Location: Pimp'n ain't E-Z! But driving ur FD makes it easier!
Posts: 2,705
Default

Mine won't hold idle either until after about 5 minutes..but probably cuz i've got more issues then most of u



I'm in the market for a stock s5 TB btw....just to swap mine out and see what happens...
Rotaryman88 is offline  
Old 11-26-2003, 12:37 AM
  #7  
Senior Member
 
BigTurbo74's Avatar
 
Join Date: Jul 2002
Posts: 2,315
Default

my engine will idle in cold but runs like complete *** for about 20 secs when on start up and has a low idle when cold, but when it warms up it goes up..
BigTurbo74 is offline  
Old 11-26-2003, 01:21 AM
  #8  
Senior Member
 
sidewinderx7's Avatar
 
Join Date: Jun 2002
Location: WA
Posts: 1,312
Default

everyones car is like that with the tb mod. Most cars will barely idle, and then the first time you stop the car if you dont put on the gas it will die. After you start it up the second time, it will run like a champ
sidewinderx7 is offline  
Old 11-26-2003, 02:24 AM
  #9  
Senior Member
 
ZenRXSeven's Avatar
 
Join Date: Jul 2003
Location: Pottstown, PA
Posts: 248
Default

Hmm... that's interesting... because it just occured to me today that something about doing the TB mod might have something to do with why my TII wont idle. I have a freshly built and streetported s4 turbo motor that will not idle. It needs a little throttle fluttering to get it running, and when it's running, it seems to run perfectly fine, but it just will not idle. It doesn't even try. I've let it warm up for 15 minutes with my foot on the gas holding it at 1000rpm, and as soon as I let off the pedal, it dies just as it does when cold.



Although, I still have to fiddle around with some of the vacuum lines and crap, but now it does seem like the TB mod might have a lot to do with the non-idling problem.
ZenRXSeven is offline  
Old 11-26-2003, 07:55 AM
  #10  
Super Moderator
Thread Starter
 
Baldy's Avatar
 
Join Date: Sep 2002
Location: Tallahassee, FL
Posts: 5,425
Default

Originally Posted by ZenRXSeven' date='Nov 26 2003, 04:24 AM
Hmm... that's interesting... because it just occured to me today that something about doing the TB mod might have something to do with why my TII wont idle. I have a freshly built and streetported s4 turbo motor that will not idle. It needs a little throttle fluttering to get it running, and when it's running, it seems to run perfectly fine, but it just will not idle. It doesn't even try. I've let it warm up for 15 minutes with my foot on the gas holding it at 1000rpm, and as soon as I let off the pedal, it dies just as it does when cold.



Although, I still have to fiddle around with some of the vacuum lines and crap, but now it does seem like the TB mod might have a lot to do with the non-idling problem.
that sounds more like a vacuum leak. My idle problem is only until it warms up, which now seems to be the norm. After warming up, it should idle.
Baldy is offline  


Quick Reply: A Couple Things For Cold Weather



All times are GMT -5. The time now is 11:27 PM.