Corksport (ps) Exhuast Question
#12
[quote name='FCmaniac' date='Jul 1 2005, 03:28 PM']That cat back is ear bleeding loud with a header and just straight pipe or rb presilencer... just thought I'd warn ya
[/quote]
I wish there was a way to get a new header and high flow cat without making the car louder, i want to try and get a little more power.
[snapback]733112[/snapback]
[/quote]
I wish there was a way to get a new header and high flow cat without making the car louder, i want to try and get a little more power.
#13
[quote name='porsche4786' date='Jul 1 2005, 08:07 PM']I wish there was a way to get a new header and high flow cat without making the car louder, i want to try and get a little more power.
[/quote]
If you add enough silencers or I should say a big enough one after the cat, you can. Or you can just keep the stock mani and use RB's cat eliminator pipe with presilencer or a cat setup. This is much quieter and the power difference with a header is minimal... unless you're talking about an SDJ header or something like that which you'd probably want to use with some sort of porting anyway.
[snapback]733131[/snapback]
[/quote]
If you add enough silencers or I should say a big enough one after the cat, you can. Or you can just keep the stock mani and use RB's cat eliminator pipe with presilencer or a cat setup. This is much quieter and the power difference with a header is minimal... unless you're talking about an SDJ header or something like that which you'd probably want to use with some sort of porting anyway.
#14
[quote name='teknics' date='Jul 1 2005, 05:06 PM']why would you *want* a kink in your exhaust system? go through all the trouble of getting less resistance in your exhaust only to put a kink back in it?
i never have and never will understand that, ive seen some turn on almost 90 degree angles on some of the civic hatches around here.
kevin.
[/quote]
90 degrees is way to much...thats why those are on civics ...i just want a "JDM kink" at the tip like my friends Blitz nur spec exhuast on his S13 the thing is hot...plus it looks a lot better then a striaght pipe coming out the back
i never have and never will understand that, ive seen some turn on almost 90 degree angles on some of the civic hatches around here.
kevin.
[snapback]733071[/snapback]
[/quote]
90 degrees is way to much...thats why those are on civics ...i just want a "JDM kink" at the tip like my friends Blitz nur spec exhuast on his S13 the thing is hot...plus it looks a lot better then a striaght pipe coming out the back
#15
[quote name='teknics' date='Jul 1 2005, 03:06 PM']why would you *want* a kink in your exhaust system? go through all the trouble of getting less resistance in your exhaust only to put a kink back in it?
i never have and never will understand that, ive seen some turn on almost 90 degree angles on some of the civic hatches around here.
kevin.
[/quote]
The RB cans have a slight *kink* in the exhaust tip, maybe 10 to 15 degrees
The Corksport one doesn't kink anywhere near 90 degrees, they have the single set-up hanging from the ceiling, I bumped my head on it in thier showroom more than enough times to remember what it looks like.
i never have and never will understand that, ive seen some turn on almost 90 degree angles on some of the civic hatches around here.
kevin.
[snapback]733071[/snapback]
[/quote]
The RB cans have a slight *kink* in the exhaust tip, maybe 10 to 15 degrees
The Corksport one doesn't kink anywhere near 90 degrees, they have the single set-up hanging from the ceiling, I bumped my head on it in thier showroom more than enough times to remember what it looks like.
#16
[quote name='89 Rag' date='Jul 2 2005, 02:23 PM']The RB cans have a slight *kink* in the exhaust tip, maybe 10 to 15 degrees
The Corksport one doesn't kink anywhere near 90 degrees, they have the single set-up hanging from the ceiling, I bumped my head on it in thier showroom more than enough times to remember what it looks like.
[/quote]
hmm my rb's are straight, the tip is angle cut...ill have to check, its laying outside right now anyway.
kevin.
The Corksport one doesn't kink anywhere near 90 degrees, they have the single set-up hanging from the ceiling, I bumped my head on it in thier showroom more than enough times to remember what it looks like.
[snapback]733376[/snapback]
[/quote]
hmm my rb's are straight, the tip is angle cut...ill have to check, its laying outside right now anyway.
kevin.
Thread
Thread Starter
Forum
Replies
Last Post
KoukiS5
Rotary Engine Building, Porting & Swaps
12
05-20-2004 09:58 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)