NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   clutch problems (https://www.nopistons.com/2nd-generation-specific-17/clutch-problems-68817/)

traderguy 01-22-2008 01:53 PM

I have a intermittent clutch peddle problem. Every once in awhile the clutch peddle doesnt return all the way to the top after I remove my foot off of it. The clutch releases and the car drives fine its just the peddle. Any ideas? Thanks Dan I have changed the fluid and made sure everything was good and bled so I dont think thats the problem. How do I know if the master or slave cylinder is going bad neither one leaks..

Seppuku 01-22-2008 07:33 PM

Sounds like slave going out. Doesnt always show a visible leak the pressure often just bypasses inside. Change the master with it as the systems are all old and your bound to have to change it sooner than later.

teknics 01-24-2008 06:05 PM

yea just replace the master and slave, your problem is more then likely the slave by itself going bad, but both parts can be had for cheap and no need to have to bleed the system twice since the master will probably go bad shortly after you put a new slave on it anyway lol



kevin.

Leetheslacker 01-24-2008 06:27 PM

had this problem before, happened once in a while drifting.



i think someone along a motor or trans swap the slave got replaced and havent had it since.

traderguy 01-26-2008 02:53 PM

Thanks Guys I picked up the new parts today.


All times are GMT -5. The time now is 04:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands