Well you might not have to do, I moved my battery to the back of my car, and weeded out the chassis wiring so I am redoing a lot of from scratch.... https://www.nopistons.com/forums/pub...IR#>/wacko.png

do you have power at the clip, all the time? that little wire is what turns the starter on, it should only have power in start position



mike

do you have power at the clip, all the time? that little wire is what turns the starter on, it should only have power in start position



mike [/quote]

It has power when i turn the car to accessory...

Well I finally cleaned up all the loose wires and I did some investigation. After cleaning up all the gas that spray on my car https://www.nopistons.com/forums/pub...1047683358.gif I found out that no wires have pwr @ the start position except the single wire on the ignition, which has power @ access/on/start, some other wires in the loom have power @ on and some @ on & accessory. So is there a relay for the starter?

theres that switch, ah is your wire black with a green tracer?



mike

When shrunk you cannot read the fine print. Anyhow yea mike there is a switch I must be missing.... thxs for all the help!

Well I looked at the real wiring diagram of the ignition switch and it has 5 wires, I just must have thew wrong one...