2nd Generation Specific 1986-1992 Discussion

cant post...big issue here!

Old Feb 23, 2013 | 07:03 PM
  #1  
gangrene's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 8
Default cant post...big issue here!

Trying my first post, having issues
Old Feb 23, 2013 | 07:04 PM
  #2  
gangrene's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 8
Default Re: cant post...big issue here!

So now it works! Wohoo... novel of info comin
Old Feb 23, 2013 | 07:06 PM
  #3  
gangrene's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 8
Default Re: cant post...big issue here!

Hey, im craig from louisville, and i have a 91 vert auto with manual swap and my starter is doin nothing. No radio either. Checked fuses, but im questioning the wiring to bypass the starter kill, and neutral safety switch.
Old Feb 23, 2013 | 07:17 PM
  #4  
gangrene's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 8
Default Re: cant post...big issue here!

Ok, heres the novel... 91 vert with 88 vert drivetrain. Swapped whats needed from s5 to s4 engine, and swapped auto for manual. Cut white three pronged clip close to auto tranny and spliced bottom wires together. Single wire to red manual wire. Six pin clip with middle bottom wire to other red wire. Reverse lights work, all electrical works except starter, and radio. Used a jumper wire to maybe starter kill relay after listed above failed(black blue wire to green blue wire) cut light green yellow wire on same harness as well. Electric fan disconnected, headlights bright even with key in start. Starter checked out as well.... help!!!!!
Old Mar 16, 2013 | 10:54 AM
  #5  
yeldaoh's Avatar
Junior Member
 
Joined: Mar 2013
Posts: 3
Default Re: cant post...big issue here!

i am trying to post as well cant find where to click to start ? can u help
Old Apr 6, 2013 | 12:24 PM
  #6  
ImHozzmanRX7's Avatar
Junior Member
 
Joined: Apr 2013
Posts: 25
From: Chino Hills, CA
Default Re: cant post...big issue here!

Try the "new Thread" button at the top of the forum
Old Apr 6, 2013 | 12:48 PM
  #7  
gangrene's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 8
Default Re: cant post...big issue here!

I have all my issues dealt with... now, to just figure out all these turboII parts i have now whats missing, and where they go.....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wanglerrx7
Rotary Engine Building, Porting & Swaps
2
Oct 5, 2009 07:13 PM
Sniper_X
RX-7 & RX-8 Parts For Sale & Wanted
21
Nov 9, 2008 07:43 PM
bigtime
Insert BS here
15
Oct 6, 2002 02:51 PM
Seppuku
Front Desk
2
May 4, 2002 01:06 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:06 PM.