Bushing Kit
#1
Hey whats up. i was wondering what do you need to take off the old bushings to put the new ones on? I heard you can use a blow torch for those really stuck on ones, is there a special tool besides torching it up?. Also the complete bushing kit covers what bushings on the FC? I have a bed squeaking noise coming from the back when i hit a bump. Can ya please tell me specifically whcih ones they cover.
Im going to get it from the NOpistons.com store with some SS brake lines.
Thanks,
Jason NYC
Im going to get it from the NOpistons.com store with some SS brake lines.
Thanks,
Jason NYC
#2
you can get them in sets for the front or rear. they usually include new bushings for the front A-arm / control arm, bushings for the front control link that links the ARB to the control arm, and i think that's it.
if you get polyurethane, they will still squeek sometimes, but the ride is much better and smoother.
i got mine from mazdatrix, but you can get then anywhere that suspension technics stuff is sold.
if you get polyurethane, they will still squeek sometimes, but the ride is much better and smoother.
i got mine from mazdatrix, but you can get then anywhere that suspension technics stuff is sold.
#3
victoria british also sells the bushings. you can get their rx-7 catalog from victoriabritish.com
here are the mazdatrix bushings:
http://www.mazdatrix.com/h6_86-92.htm
i'd also recommend the derilin bushings to eliminate the passive rear steer that is most likely worn out.
here are the mazdatrix bushings:
http://www.mazdatrix.com/h6_86-92.htm
i'd also recommend the derilin bushings to eliminate the passive rear steer that is most likely worn out.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)