yep, might not have enough wires though

its one short LOL and im going to put a quick disconnect on that one wire.

UPDATE. Got The fuel pump wired up had to extend a couple cables from the microtech harness. I am just going to a walbro 225lph for now to get the car moving. I also finished routing the 12V+ Switched to the coils and the microtech. Also started testing the functionality of the car since it has been close to 4 years since this car has had power. Hooked op the battery and the lights I had already tested so they checked out. One of the flip ups was not going up so i sprayed the inside of the motor relay with electrical connection cleaner and did the trick. here is a list.



Lights and flip up = OK

Tail Lights and turn signals = OK

Wipers = Only work on the I Setting tried it with 2 switches and did the same suspect motor.

Horn = the CPU Clicks but the horn does not sound. I provided the horns with a 12V + and they sounded

Dome Lights = OK

Hatch Light on Strut = OK

HVAC Controls = OK Yes I want A/C.

Little to no progress on my build had to spend $2600 on a transmission rebuild for my ford explorer. All wiring is done everything is functional just waiting on the $$$ for the motor. I can taste it already...............