2nd Generation Specific 1986-1992 Discussion

Bogs Down Around 3600rpm

Thread Tools
 
Search this Thread
 
Old 01-13-2003, 05:18 PM
  #1  
dss
Junior Member
Thread Starter
 
dss's Avatar
 
Join Date: Jan 2003
Location: NC
Posts: 7
Default

I replaced some of my vaccum lines and now it bogs down around 3600rpm. I replaced the pill in the vaccum line to the boost sensor but it still bogs down. what could it be
dss is offline  
Old 01-13-2003, 05:29 PM
  #2  
Junior Member
 
Iggy76's Avatar
 
Join Date: Jan 2003
Posts: 22
Default

Might be your secondary's. We had the same problems on a friends car.
Iggy76 is offline  
Old 01-13-2003, 05:52 PM
  #3  
dss
Junior Member
Thread Starter
 
dss's Avatar
 
Join Date: Jan 2003
Location: NC
Posts: 7
Default

would it happen over night??
dss is offline  
Old 01-13-2003, 05:56 PM
  #4  
Junior Member
 
Iggy76's Avatar
 
Join Date: Jan 2003
Posts: 22
Default

No probibly not... Not unless there was some bizarre event and the laws of physics were negelcted, nothing I can't think of would do that over night. The car would have had to be sitting or the secondarys never were working and I assume that they were.
Iggy76 is offline  
Old 01-13-2003, 06:04 PM
  #5  
dss
Junior Member
Thread Starter
 
dss's Avatar
 
Join Date: Jan 2003
Location: NC
Posts: 7
Default

yeah everything was working fine. I replaced my pulsation damper and since I was down there I replaced some vaccum lines and now I have that problem.
dss is offline  
Old 01-13-2003, 06:19 PM
  #6  
Junior Member
 
Iggy76's Avatar
 
Join Date: Jan 2003
Posts: 22
Default

Only thought might be that the one of the lines might be bad or not connected correctly/snuggly.
Iggy76 is offline  
Old 01-13-2003, 09:12 PM
  #7  
Senior Member
 
87RX7NA's Avatar
 
Join Date: Jan 2002
Posts: 240
Default

Does it just bog down for a second, then kick back in?
87RX7NA is offline  
Old 01-13-2003, 10:32 PM
  #8  
dss
Junior Member
Thread Starter
 
dss's Avatar
 
Join Date: Jan 2003
Location: NC
Posts: 7
Default

no it keeps bogging as the rpms slowly increase

then when I shift it back fires
dss is offline  
Old 01-14-2003, 12:07 AM
  #9  
Senior Member
 
Racer X's Avatar
 
Join Date: Sep 2002
Location: Vanderhoof,BC(Canada)
Posts: 5,542
Default

Sounds like you might have a crossed line from when you replaced them.You might want to take another look and make sure that it isn't the problem.
Racer X is offline  
Old 01-14-2003, 10:36 AM
  #10  
Junior Member
 
hugues's Avatar
 
Join Date: Dec 2002
Posts: 17
Default

It backfires when you downshift, that means, the ACV (air control valve) valve and/or the AAV (anti after burn valve) on top of ACV don't function as they should.



check the lines that go to the ACV. Yo ucan check my web page (in sig) for ACV under emissions->secondary air



Since it was working fine before, you must have crossed some vacuum lines.



now, if you ditched the air pump and ACV long time ago, this above is just BS



hugues -
hugues is offline  


Quick Reply: Bogs Down Around 3600rpm



All times are GMT -5. The time now is 11:13 PM.