2nd Generation Specific 1986-1992 Discussion

Big Oil Problem! Need Some Advice

Thread Tools
 
Search this Thread
 
Old 10-03-2003, 03:36 AM
  #1  
Senior Member
Thread Starter
 
sidewinderx7's Avatar
 
Join Date: Jun 2002
Location: WA
Posts: 1,312
Default

Ok, so the other day after the car sat for nearly 3 months i start it up.. take it easy, try to get out all the cob webs, etc..



before i changed the oil or anything i took it for a spin. Seemed to be going well so i got it into boost a little, about 3lbs... when i got to iluvmy88's house we look under the hood to find oil all over the drivers side of the car. Well we couldnt figure out where it came from, so we put more oil in and off i went back to my house. Well i cleaned it up, etc.. then took the turbo off for other reasons.. lol.. tonight we put everything back together and i took it out for a spin. A short cruise, turned up everything being normal. So i take a longer cruise, this time getting into about 7lbs of boost. Well right after i did that i pulled over to check if oil spit out. Sure enough it did. So i drive home ... (and btw: were not talking a little oil.. i mean total soakage!) And examine it a little closer. Find out the oil is shooting out of the oil filler neck vent! Then i look at my turbo, and there is oil seeping out all over. My question is this.. did i blow my oil seals? The car did sit for 3 months, so its quite possible. But has anyone seen anything like this that WASNT blown oil seals?



Thanks!
sidewinderx7 is offline  
Old 10-03-2003, 11:46 AM
  #2  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

i think it might be like a plugged pcv or something. if you pressureize the oil pan it will shoot oil everywhere



mike
j9fd3s is offline  
Old 10-03-2003, 11:59 AM
  #3  
Senior Member
Thread Starter
 
sidewinderx7's Avatar
 
Join Date: Jun 2002
Location: WA
Posts: 1,312
Default

think that would cause it to burst out the turbo too?
sidewinderx7 is offline  
Old 10-03-2003, 12:11 PM
  #4  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

yep, it will come out the easiest places. it also can do this if its overfilled



mike
j9fd3s is offline  
Old 10-03-2003, 12:47 PM
  #5  
Senior Member
Thread Starter
 
sidewinderx7's Avatar
 
Join Date: Jun 2002
Location: WA
Posts: 1,312
Default

*crosses fingers*



i'll go out and check in a minute. I know the pcv on the oil filler neck is vented to the air, and oil shot out of it big time ... but its been vented to the air for along time with no problem. I will check the other one.
sidewinderx7 is offline  
Old 10-03-2003, 02:35 PM
  #6  
Senior Member
 
rmaiersg's Avatar
 
Join Date: Aug 2002
Location: One hour north of chicago (Mundelein to be exact)
Posts: 811
Default

when my pcv was clogged my car smoked like mad. People would be like "hey!!! Your car is on fire!!!"



....ah good times
rmaiersg is offline  
Old 10-03-2003, 02:49 PM
  #7  
Junior Member
 
silvias13's Avatar
 
Join Date: Oct 2003
Posts: 4
Default

FiRST OFF WHY WAS A FC SiTTNG FOR 3 MONTHS WHEN iT COULD HAVE BEEN DRiVEN. SECOND CHEC iF iTS BLOWiNG OUT THE Di STiC TOO
silvias13 is offline  
Old 10-03-2003, 05:00 PM
  #8  
Senior Member
 
Seppuku's Avatar
 
Join Date: Mar 2002
Location: Ky
Posts: 2,723
Default

Originally Posted by silvias13' date='Oct 3 2003, 03:49 PM
FiRST OFF WHY WAS A FC SiTTNG FOR 3 MONTHS WHEN iT COULD HAVE BEEN DRiVEN. SECOND CHEC iF iTS BLOWiNG OUT THE Di STiC TOO
THIRD TAKE THE CAPS OFF.
Seppuku is offline  
Old 10-03-2003, 09:26 PM
  #9  
Senior Member
Thread Starter
 
sidewinderx7's Avatar
 
Join Date: Jun 2002
Location: WA
Posts: 1,312
Default

Ok, now how do i tell if it was sticking or not .. im about to go pull it out. I mean, obviously if there are cuts or gashes or its broken. But if not... then what do i look for?
sidewinderx7 is offline  
Old 10-04-2003, 04:25 AM
  #10  
Senior Member
Thread Starter
 
sidewinderx7's Avatar
 
Join Date: Jun 2002
Location: WA
Posts: 1,312
Default

bump!@
sidewinderx7 is offline  


Quick Reply: Big Oil Problem! Need Some Advice



All times are GMT -5. The time now is 08:17 AM.