Apex-i Power Fc
10-29-2003, 12:09 AM
#3
Senior Member
Thread Starter
Join Date: Oct 2003
Location: Boston Ma.
Posts: 1,420
http://www.fc-datalogit.co.nz/model-status.html They claim to have it for the S4 and S5 Fc3s.
Ive never even heard about it on an FC i just wanted to run it by to see if anyone knows about it.
Ive never even heard about it on an FC i just wanted to run it by to see if anyone knows about it.
10-29-2003, 12:14 AM
#4
Senior Member
Join Date: Nov 2002
Posts: 3,108
ok i don't understand why i can't use a apexi Power FC for FD that is off the shelf.
All i have to do is splice the harness meant for a FD into my FC, possibly requiring me to use FD sensors, and ofcourse i'll need the FD MAP sensor.
THe FD map can run a s5 TII engine... the compression ratio is the same, the boost is higher though... that's it.
All i have to do is splice the harness meant for a FD into my FC, possibly requiring me to use FD sensors, and ofcourse i'll need the FD MAP sensor.
THe FD map can run a s5 TII engine... the compression ratio is the same, the boost is higher though... that's it.
10-29-2003, 07:21 AM
#5
Senior Member
Join Date: Aug 2001
Location: Pimp'n ain't E-Z! But driving ur FD makes it easier!
Posts: 2,705
There are PowerFCs for series 4 and up Rx7s....
Many of them for a series 4 you'll have to get second hand from japan or australia...runs about $1200 for an FC usually...
Many of them for a series 4 you'll have to get second hand from japan or australia...runs about $1200 for an FC usually...
10-29-2003, 11:41 AM
#6
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by Cheers!' date='Oct 28 2003, 10:14 PM
ok i don't understand why i can't use a apexi Power FC for FD that is off the shelf.
All i have to do is splice the harness meant for a FD into my FC, possibly requiring me to use FD sensors, and ofcourse i'll need the FD MAP sensor.
THe FD map can run a s5 TII engine... the compression ratio is the same, the boost is higher though... that's it.
All i have to do is splice the harness meant for a FD into my FC, possibly requiring me to use FD sensors, and ofcourse i'll need the FD MAP sensor.
THe FD map can run a s5 TII engine... the compression ratio is the same, the boost is higher though... that's it.
mike
10-29-2003, 12:20 PM
#8
Senior Member
Join Date: Nov 2002
Posts: 3,108
Originally Posted by j9fd3s' date='Oct 29 2003, 12:41 PM
[quote name='Cheers!' date='Oct 28 2003, 10:14 PM'] ok i don't understand why i can't use a apexi Power FC for FD that is off the shelf.
All i have to do is splice the harness meant for a FD into my FC, possibly requiring me to use FD sensors, and ofcourse i'll need the FD MAP sensor.
THe FD map can run a s5 TII engine... the compression ratio is the same, the boost is higher though... that's it.
All i have to do is splice the harness meant for a FD into my FC, possibly requiring me to use FD sensors, and ofcourse i'll need the FD MAP sensor.
THe FD map can run a s5 TII engine... the compression ratio is the same, the boost is higher though... that's it.
mike [/quote]
damn
