alternator wiring
#1
alternator wiring
I pulled out the engine bay wiring harness. I'm not 100% sure how to rewire the alternator. My thought is to hook terminal R to the ignition switch can it be that easy? do I need any resistance ? does L just go to the guage in the dash?
Dave
Dave
#2
Re: alternator wiring
It's ashame it really seems like the knowledge base on this site is gone.
I hope this will help someone else out. the top pin on the back ( R) connects to switched 12v I connected it to my fuel pump relay as I dont have much wiring left. I took (L ) bottom pin on that connector and connected it to R through a 25 ohm resistor I used 2 10 watt 50 ohm resistors in paralell for 25 ohm 20 watts most likely crazy over kill but thats what I had. It is working well so far.
Good luck guys I'm jumping over to the evil forum
Dave
I hope this will help someone else out. the top pin on the back ( R) connects to switched 12v I connected it to my fuel pump relay as I dont have much wiring left. I took (L ) bottom pin on that connector and connected it to R through a 25 ohm resistor I used 2 10 watt 50 ohm resistors in paralell for 25 ohm 20 watts most likely crazy over kill but thats what I had. It is working well so far.
Good luck guys I'm jumping over to the evil forum
Dave
Thread
Thread Starter
Forum
Replies
Last Post
BigTurbo74
RX-7 & RX-8 Parts For Sale & Wanted
6
11-26-2007 06:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)