NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   air pump? (https://www.nopistons.com/2nd-generation-specific-17/air-pump-70978/)

ShadowboyM 10-26-2008 09:44 AM

Hee i have a 87 fc and non turbo and i sold the car not running and and i bought it back a few months later and when i got it back it was running but i notice the person who got it running had like half assed it, and i noticed the air pump wasnt even there, the car ran like ****, i put a air pump and all that back in the car and everything else that i noticeed was wrong and it ran a lil better but my queston is do u need the air pump or is it jus the turbos that can run without them and turn out fine

fc3s4utnv 10-26-2008 11:28 AM

air pump is paper weight, but you cant just take it off, you have to have some block off plates

ShadowboyM 10-27-2008 12:13 AM


Originally Posted by fc3s4utnv' post='910600' date='Oct 26 2008, 09:28 AM
air pump is paper weight, but you cant just take it off, you have to have some block off plates





block off plates??? can u explain??? https://www.nopistons.com/forums/pub...1047683561.gif

jamest16748500 10-27-2008 10:16 AM

i think the s4 use exhaust pressure for the 6pi to work on s5 the air pump is used to actuate the 6pi. since you have a s4 i would check to see if your cat is plugged up if he took the air pump off correct me if im wrong

Seppuku 10-27-2008 11:13 AM


Originally Posted by ShadowboyM' post='910620' date='Oct 27 2008, 01:13 AM
block off plates??? can u explain??? https://www.nopistons.com/forums/pub...1047683561.gif

the air pump runs into the air control valve on the lower intake manifold. If you remove the air pump you must take off the acv and block it off. If your cat is still intact you need the air pump. If it was run long with out the pump its most likely clogged now. I would almost start over with the car if it were me since its unknown what was hasnt been done or done to it.. New vaccuum lines, gaskets, and really check the thing over.

ShadowboyM 10-28-2008 11:12 PM

thanks,s i jus picked up a new 13b today and imma start over with it


All times are GMT -5. The time now is 08:51 AM.


© 2024 MH Sub I, LLC dba Internet Brands