What part do i need to from RB to be able to run the oil line to the turbo? since my oil cooler is a non turbo w/o a bung or whatever.

 

Your current oil cooler lines are a direct fit into the 13BT engine. They go to the same place on the 13BT as they would on the 13B NA. The turbo oil lines run to the engine, not the oil cooler. So you don't need any lines if you are running the stock turbo.

Unless your T2 engine does not come with turbo oil lines, or you just want to get fancy, you'll be fine. You'll see what I mean when you get the engine.

 

oh! thxs

 

Just remember to replace all your copper o-rings, before you drop the engine in or you'll have quite a few leaks once you get the car started. And its a lot harder to replace those o-rings then. =)