NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Ac Kills My Engine... (https://www.nopistons.com/2nd-generation-specific-17/ac-kills-my-engine-19924/)

75 Repu 06-29-2003 09:32 PM

well, Basically like the title says... sometimes when I turn on the AC the car shuts off.. What could be the cause..

75 Repu 06-29-2003 09:33 PM

oh yeah, forgot to add, that it shuts off only when I am not on the throttle..

Not during driving.. https://www.nopistons.com/forums/pub...1047683664.gif

75 Repu 06-29-2003 10:01 PM

Geez man.. ! Who do I have to **** to get some answers around here?



hahahah

vosko 06-29-2003 11:10 PM

you have to **** banzai!



check for vacuum leaks.......... could tons of annoying crap

rotary>piston 06-29-2003 11:22 PM

Mine does the same sometimes. It's because your BAC is crappy. Mine will stall at first, but will be fine after the BAC loosens up.

1Revvin7 06-29-2003 11:56 PM

It's the Bac.

75 Repu 06-30-2003 10:11 AM

ok, I had already checked for vacuum leaks. and like Rotary>piston said, once It has been on for bit before letting it idle, it will stay on and not kill the engine at idle.. So the Bac Valve huh..? Is that thing expensive, or can it be cleaned..?

Baldy 06-30-2003 10:37 AM

I think I remember reading in the haynes manual that you can clean it...otherwise, just buy one from someone who removed theirs.

75 Repu 06-30-2003 10:38 AM

Cool, weekend project.. !

rxheaven86 06-30-2003 11:07 AM

there is another fix... i had the same problem last summer there's a wiring harness that likes to come undone especially if you have work done to the motor and a rough idle.... it's just one of those mazda electrical problems. i had the same problem with my car last summer and the wiring harness would come undone and it would sound like there was a vaccum leak somewhere under the hood, but it was just the ac trying to work and it was blowing cold but the car would stall without throttle. before you start investigating parts like the bac make sure every one of thoes wiring harnesses is extremelly tight or you might just have the same loose connection that i had.

75 Repu 06-30-2003 11:12 AM


Originally Posted by rxheaven86' date='Jun 30 2003, 08:07 AM
before you start investigating parts like the bac make sure every one of thoes wiring harnesses is extremelly tight or you might just have the same loose connection that i had.

I've been doing that.. and have noticed a few unplugged conectors, but I put them where they belong.. I changed the primary injectors, and got to check out all the vacuum lines in there and connectors with the intake off.. Hw bout stuff like bad grounds and and electrical system stuff, could this also add to the problem..

RX7Aggie 06-30-2003 12:14 PM

1 Attachment(s)
just remove the AC. its a frivolous and unnecessary ammenity anyway. https://www.nopistons.com/forums/pub...IR#>/bigok.gif

75 Repu 06-30-2003 12:19 PM

Uh, no.. I like to not sweat in my car when it is too hot to put the top down.. Besides, It is fast enough for me.. Even if it does weigh 3000 Lbs, and runs 18's in the 1/4

Seppuku 06-30-2003 12:38 PM

Try tuning the car up if you havent yet, when i first got my car it would do the same with the ac on when i pulled up to a light. After i got her home the first day and tuned it up and adjusted the idle i had no more problems.

FCmaniac 06-30-2003 12:49 PM

REPU, if none of this **** works, PM me, I'm almost positive I have a couple extra BAC's laying around

75 Repu 06-30-2003 12:49 PM

Well a tune up is on the list of things to do. so Hopefully that and a good cleaning of the engine and electrical connections and ground connections will help..

75 Repu 06-30-2003 12:50 PM


Originally Posted by FCmaniac' date='Jun 30 2003, 09:49 AM
REPU, if none of this **** works, PM me, I'm almost positive I have a couple extra BAC's laying around

Cool, I will let you know.. Thanx

Rob x-7 06-30-2003 07:41 PM

mine does it now and then too, I refuse to raise the idle because

its idles perfect.



It starts and runs perfect, its tuned thats for sure, it will stall

when you are coming to a stop with the ac on right? I just pop the clutch

and get it started again, if its the BAC im sure it can be cleaned in my

case because otherwise the car is running 100%.



Does a sometimes bad BAC hinder performance or just idle?

Seppuku 06-30-2003 10:42 PM

rob i think the bac only helps the engine under load at idle so to answer your question no it wouldnt hinder performance.

goblues24 07-01-2003 07:20 PM

try to spend about 2 hours washing waxing polishing up your car...when i shine up my vert all the little problems seem to go away...probly just coincedence...lol but i have the same problem sometimes...put it in neutral at stop lights when it acts up...or slightly push the accelerator pedal..brings the rpms up to what would be a normal idle...all temp fixes though.

Cheers! 07-01-2003 07:45 PM


Originally Posted by goblues24' date='Jul 1 2003, 04:20 PM
try to spend about 2 hours washing waxing polishing up your car...when i shine up my vert all the little problems seem to go away...probly just coincedence...lol but i have the same problem sometimes...put it in neutral at stop lights when it acts up...or slightly push the accelerator pedal..brings the rpms up to what would be a normal idle...all temp fixes though.

hahaha.



same thing happens to me too... and when ihave a hot chick in teh passenger seat my car doesn't run or idle right...



I think she gets jealous

75 Repu 07-02-2003 10:04 AM


Originally Posted by Rob x-7' date='Jun 30 2003, 04:41 PM
it will stall

when you are coming to a stop with the ac on right?

Yup.. Thats usually the only time it does it..


All times are GMT -5. The time now is 04:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands