GreyGT-C's project is finally underway
11-09-2005, 12:31 AM
#14
Senior Member
Join Date: Jan 2004
Location: Columbia IL/St. Louis MO
Posts: 2,748
Originally Posted by jspecracer7' post='776234' date='Nov 7 2005, 06:42 AM
everyone talks about going 4 rotor like it's easy to come up with $100,000
everyone talks about going 3 rotor like it's easy to come up with $15,000.
heh, looks sweet GREY. what exactly are you going to be running it in? and i thought you were going full tube chassis, and not just the front?
11-09-2005, 02:11 AM
#15
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
Posts: 2,436
What am i gonna be running it in? It's my new daily driver. I may use it for a few track weekends at VIR and Road Atlanta too.
I'm just tubing out the front end so that the engine sits in there properly without causeing handling and/or weigh issues. That and i had a very slight bend in the end of my frame rail due to a previous wreck. They are also tying the full cage into it the front end.
I'm just tubing out the front end so that the engine sits in there properly without causeing handling and/or weigh issues. That and i had a very slight bend in the end of my frame rail due to a previous wreck. They are also tying the full cage into it the front end.
11-09-2005, 07:52 AM
#16
Senior Member
Join Date: May 2002
Location: Okinawa, Japan
Posts: 4,928
Originally Posted by rowtareh' post='776792' date='Nov 9 2005, 03:31 PM
everyone talks about going 3 rotor like it's easy to come up with $15,000.
heh, looks sweet GREY. what exactly are you going to be running it in? and i thought you were going full tube chassis, and not just the front?
Shut the **** up
A single turbo FD will need very few mods to run a 20B...an FC even less. I can see $10k...but 15k?
11-10-2005, 12:24 AM
#17
Senior Member
Join Date: Dec 2002
Location: fredneck MD
Posts: 4,107
yaeh, he has no pratical experience but comments on everyhting.
READING IS NOT DOING!!!
not everything you read is correct! acting like an internet athority is dumb when you have zero experience.
If i wanted to put a 20b in my car, it would cost me 5k tops with the engine. That is WITH EMS. Even cheaper if I kept the stock twin turbos.
a 15k figure might be WITH a car, but in a FC i could get it all done for under 10k easily.
ok im done
READING IS NOT DOING!!!
not everything you read is correct! acting like an internet athority is dumb when you have zero experience.
If i wanted to put a 20b in my car, it would cost me 5k tops with the engine. That is WITH EMS. Even cheaper if I kept the stock twin turbos.
a 15k figure might be WITH a car, but in a FC i could get it all done for under 10k easily.
ok im done
