tkubl

I have a fair amount of mechanical experience but not with rotery engines. I have always wanted to build a project car and the 20b conversion into my 93 rx7 has realy intrested me. I realize that I have a lot to lern but I am willing to do my homework. I have nothing but time to complete this. I have managed to save about 160k for this car and am excited to get started. I just need to do a ton of recerch to make sure that I am going in the right direction.



I am looking to build a street car with as much horse power as possible with out sacrificing too much reliability. I want to build a new engine with the best internal parts possible. I have also heard that a g-force T-56 6 speed tranny is a good choise. Money is almost a non issue, I need to know what: engion mods, roters, housings, e-shaft, turbo, dump gate, intercooler, ecm, transmition, cluch, suspention etc... etc... etc... that will work best together with the 20b engine and be fairly reliable don't forget the stuff that I havent listed, if you can think of annything please list it, please include websites if possible. I would like to get 400-700 rwhp if possible, keep in mind reliability is a issue.



If annybody has suggestions and expected hp gains or can for see any problims that I might run into it would be verry appriciated!

To_slow

For about 50k $ turn key new 20b block with trany set up. It can be yours at http://www.xtremerotaries.com/.



Good luck

1Revvin7

I would just call Rohan at the above website, have him build the complete engine. Guy knows his 20b stuff very well.

To_slow

Speaking of Rohan. this is what his doing for me right now. The rotors and the dry sump cover are done by Carlos Lopez . CLR.

Clarks7

Rohan needs to update his website, at least with contact information so people can contact him.

hsmidy

160k......um if you cant do the car for half of that something is wrong