NoPistons -Mazda Rx7 & Rx8 Rotary Forum
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   1st Generation Specific (https://www.nopistons.com/1st-generation-specific-16/)
-   -   What's The Best Ignition? (https://www.nopistons.com/1st-generation-specific-16/whats-best-ignition-10866/)

j9fd3s 01-20-2003 10:38 AM
ok the simple version: parts: you need another ignitior and coil and some wire. remove stock leading ignitor, it has a 2 pin connector to the pickup in the dizzy. wire it so that the ignitor you just took off and your extra one both get that same signal. wire one coil to each ignnitor, each coil to each leading plug. boom done



mike

DJ Rotor 01-20-2003 01:25 PM
Originally Posted by Racer X' date='Jan 18 2003, 10:18 PM
I know people who have it on thier cars and say it is night and day difference.I want to hook mine up so I can get rid of the loud ass cannon blast everytime I shut the car off when its warm.Having no cats has disadvantages like that but when you upgrade to direct fire all those problems get fixed. https://www.nopistons.com/forums/pub...#>/biggrin.png
That's a problem? https://www.nopistons.com/forums/pub...DIR#>/wink.pnghttps://www.nopistons.com/forums/pub...#>/biggrin.png

Racer X 01-21-2003 01:12 AM
Originally Posted by DJ Rotor' date='Jan 20 2003, 11:25 AM
Not normally. https://www.nopistons.com/forums/pub...#>/biggrin.png Can't drive the beast at night right now.I had to blast off the highway at 110 km/h last time because my radar dectector went off and the cop whipped a U-turn.He must of saw the flame when I let off. :smirk: Damn cops. :rant:

Racer X 01-21-2003 10:45 PM
Originally Posted by j9fd3s' date='Jan 20 2003, 08:38 AM
ok the simple version: parts: you need another ignitior and coil and some wire. remove stock leading ignitor, it has a 2 pin connector to the pickup in the dizzy. wire it so that the ignitor you just took off and your extra one both get that same signal. wire one coil to each ignnitor, each coil to each leading plug. boom done



mike
So what your saying is if you just go to a wrecker and buy another harness and run the power off the ignition to it then run your plug wires to your leading plugs you should be set?

Smog Fighter 01-21-2003 10:54 PM
I looked at my harness when I was measuring my oil output

and didn't see anything that looked like an ignitor.

It went from the distributer to a large harness and from the coils

to the harness....???

where is the ignitor located??

j9fd3s 01-21-2003 10:56 PM
the ignitor is a little black box on the dizzy



mike

Racer X 01-21-2003 10:59 PM
Originally Posted by Racer X' date='Jan 21 2003, 08:45 PM
So what your saying is if you just go to a wrecker and buy another harness and run the power off the ignition to it then run your plug wires to your leading plugs you should be set?
So mike would that work???

Racer X 01-21-2003 11:00 PM
Originally Posted by j9fd3s' date='Jan 21 2003, 08:56 PM
the ignitor is a little black box on the dizzy



mike
Theres two of them with black connectors on them.

Smog Fighter 01-21-2003 11:20 PM
here?

Racer X 01-22-2003 09:05 PM
Yup those are the ones.So mike about my question.....will it work?


All times are GMT -5. The time now is 11:55 PM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands