i am about to do the tb mod this week and while my tb is at the machine shop getting welded i was thinking about having them port it.



what would the benefits of porting it be, and what exactly would they need to do to port it? also, would i have to change anything else because of the porting?

[quote name='Shane.Trammell' date='May 9 2005, 03:11 PM']i am about to do the tb mod this week and while my tb is at the machine shop getting welded i was thinking about having them port it.



what would the benefits of porting it be, and what exactly would they need to do to port it? also, would i have to change anything else because of the porting?


[/quote]







Not real knowledgable on porting in general but I would think that porting a tb would allow a higher amount of air to enter the engine than compared to a stock tb but would probably give ya minimal power gains on that old ass motor ya got man. Maybe with tuning you could pull some power out of it but I think ya would probably just be wastin money better spent elsewhere ya know?

[quote name='1revnrex' date='May 9 2005, 10:54 PM']Not real knowledgable on porting in general but I would think that porting a tb would allow a higher amount of air to enter the engine than compared to a stock tb but would probably give ya minimal power gains on that old ass motor ya got man. Maybe with tuning you could pull some power out of it but I think ya would probably just be wastin money better spent elsewhere ya know?


[/quote]



does anyone know about this from experience? i know some of you guys have ported TBs

all the "extra" air needs to go somewhere. so if there arent any supporting mods, then gains are minimal if any.

[quote name='treceb' date='May 10 2005, 01:00 PM']all the "extra" air needs to go somewhere. so if there arent any supporting mods, then gains are minimal if any.


[/quote]



thanks a lot, guess ill just do the mod then.

[quote name='Shane.Trammell' date='May 10 2005, 11:11 AM']thanks a lot, guess ill just do the mod then.


[/quote]



so it doesnt do anything, but you're gonna do it anyways? https://www.nopistons.com/forums/pub...1047683561.gif

[quote name='j9fd3s' date='May 11 2005, 01:01 AM']so it doesnt do anything, but you're gonna do it anyways? https://www.nopistons.com/forums/pub...1047683561.gif


[/quote]





I tried to tell him https://www.nopistons.com/forums/pub...1047683785.gif

when i said ill just do the mod i meant ill JUST do the MOD. not the porting.



thanks for the help though guys

[quote name='Shane.Trammell' date='May 11 2005, 09:06 AM']when i said ill just do the mod i meant ill JUST do the MOD. not the porting.



thanks for the help though guys


[/quote]



why? it makes no difference in the way the car runs, unless the secondary plates weren't opening anyways, but thats a thermovalve being bad, its external

[quote name='j9fd3s' date='May 11 2005, 06:29 PM']why? it makes no difference in the way the car runs, unless the secondary plates weren't opening anyways, but thats a thermovalve being bad, its external


[/quote]



so youre saying that the tb mod isnt worth doing? i thought it cleared up the tb and made throttle response better? i know it gets rid of the coolant line that runs through the tb which should help cool it down