For all that time and effort stripping it down and making fibreglass parts and ****, you could go get a McJob and save for a porting. https://www.nopistons.com/forums/pub...R#>/unsure.png

You looking for one loi?I was considering changing mine to something with more downforce to it.If your really interested PM me a offer.

GET RID OF THE STEREO, and the speakers, etc. You can use a portable walkman. Both bumpers weigh a lot, you can make a lightweight frame to hold the plastic bumper cover.

well the 70 lb box comes out of the car easy, so before i leave for the track i just take it out. i am already drawing up some dash ideas, along with a scooped fiberglass hood. i am taking off the removable top(moonroof) and fiber glassing the hole, i might even cut alot of the roof off and replace with fiber glass, all the back windows will be replaced with 1/4 inch polly "window" just one i am making a single window to replace all 3, if you don't know what i mean, it is like the mazdatrix drag car if you have seen it.

i am going to take some pics in the next little wile, one of the progress i am at right now and, some of the hood that is going to be my mold, it is scooped and stuff, but yah they will be up soon

Remove all the wiring you don't need(stuff for emissions). Thats good for a couple of pounds. All of the heat shielding. The cover under the front of the engine. make a single sheet that goes across the bottom of the car to reduce turbulence under the car.

i have removed all of it already(heat shields), um i redid the harness from the plug and cut all the **** i don't need off, i still need to take the ac condencer out of the dash, that is next on the stripping line, starting mold of hood today also

I definetly wanna see some pics of how you do this hood, if its not too difficult, I'll put my carbon fibre to use.

well the mold got meesed.. bad hardener.. must have froze or somthin, but i am going to try again...and my digi cam aint working for some odd reason???