I'm putting all new speakers in an '85. I would like to get something bigger up front than 4inchers. Anyone care to share what they have done or seen?
|
I know that with some modding to the opening that you can stuff a set of 5 1/4" spearkers in there.
|
I have seen a few people that have made kickouts that allow for better sound quality. The stock location is horrible. I also have seen them in the door panel. Why not just get a good 4"?
|
I would like to get a little bass up front (impossible with 4's)and like you said, that location is horrible.
|
[attachment=37080:attachment]You could build fibreglass door pods like these in my car
|
In my first 7 (not the one I have now) I added some spacers to mount 5.25 speakers (so that the magnet is all that really ends up in the old 4in hole, used long screws to hold them in, and then custom molded around it with screen/bondo to make the seal. It worked out very well, but I didn't like the extra bulk up front and it took a long time. In the new car I just got some very nice 4 inchers. I think it sounds better to have small speakers crossed over in front and get your bass out of the rears and a subwoofer anyway. You really can't percieve what direction bass comes from and it's a cleaner install. With a good amp and configuration you can have that type of 4+1 setup really thump and not have to "customize" the stock location or the doors.
|
Originally Posted by FB MAZDATURBO' post='808962' date='Mar 21 2006, 09:56 AM
[attachment=37080:attachment]You could build fibreglass door pods like these in my car |
I have Two 10" Bazzooka Bass tubes, & 6.5 Components in rear,5.25Components on the Doors. And 4.25 J.B.L.'s in the foot rest !
|
6.5" components in kickpanels up front, 5.25" out back
http://max7.rx-7.org/projects/Interi...Changes017.jpg - pair of 10's in the back http://max7.rx-7.org/projects/stereo...woofers002.jpg |
nice have any extra, are you selling that custom work
[/quote] Ah they are deep, they stick off the door about 2" but i will sell them if you want them because i want to build shallower ones but it will be awhile before i am ready to sell them, i just moved the pocket back too so it is still there and functionable |
I ran 4" in the kick panels, 6 1/2" in the rear panels, tweeters in place of the clothes hooks, and a single 12" in place of one of the storage bins. Sounded great. Then I pulled the sub when I started autocrossing.
|
Originally Posted by BeaterRX7' post='809467' date='Mar 23 2006, 12:31 AM
I ran 4" in the kick panels, 6 1/2" in the rear panels, tweeters in place of the clothes hooks, and a single 12" in place of one of the storage bins. Sounded great. Then I pulled the sub when I started autocrossing. |
Originally Posted by Max7' post='809376' date='Mar 22 2006, 05:45 PM
6.5" components in kickpanels up front, 5.25" out back http://max7.rx-7.org/projects/Interi...Changes017.jpg - pair of 10's in the back http://max7.rx-7.org/projects/stereo...woofers002.jpg |
where are the pics sounds nice |
All times are GMT -5. The time now is 04:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands