NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   1st Generation Specific (https://www.nopistons.com/1st-generation-specific-16/)
-   -   smog pump removal? (https://www.nopistons.com/1st-generation-specific-16/smog-pump-removal-4372/)

pharmacy7 08-10-2002 02:49 PM

hey guys, im very new to the forums, actually this is my first post, i just bought an 84 gsl-se for $500 that runs ( actually i had to replace the fuel pump and an injector seal) and was wondering if any of you know if its possible to remove the smog pump and how to do it w/o messing up the ecu. I also was wondering if putting on a header with a race converter and then free flowing all the way back would mess with the ecu, any input would help, thanks. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

falcoln0014 08-12-2002 02:10 AM

Greetings,



I'm not sure about the models with fuel injection but on my 84-gsl I had no trouble running without the smog pump. I had to remove it because it siezed up and I was getting about 8 MPG because it wasn't turning very much. All I did was unbolt it...take off the belt...and plug up all the holes...you have to be certain you plug the holes...as for the ecu I'm not sure...you could always give it a try and if it doesn't work put it back on. Do you still have the cats on the car? The only reason I left it off mine is because it works with them...and they accidently got removed somehow...lol

Anyway, good luck



Falcoln

phinsup 08-12-2002 07:00 AM

I have ran my 83, my 84 GSL-SE, my 89 NA and my 88T II all wthout smog pump and cats, no problems. If you run without the air pump and with a cat your cat will plug up much faster as the air is required for cimbustion within the cat. As long as you remove th cat and the airpump you are rocking.

pharmacy7 08-15-2002 05:35 PM

cool, if it worked on your 84 gsl-se then it should work on mine, my exhaust is basically gone so i just (like 2 seconds ago) ordered a header from mazdatrix and a race presilencer(to replace the cats) from rx7.com. when i bolt up my exhaust ill take it off, thanks for the info. https://www.nopistons.com/forums/pub...IR#>/smile.png

Felix Wankel 08-15-2002 06:21 PM

Order an ACV block off plate and remove it as well. Its not needed when you run without an air pump.

pharmacy7 08-16-2002 10:40 AM

whats an ACV? air control valve? where is that located and where do i get the plate at? https://www.nopistons.com/forums/pub...R#>/unsure.png

j9fd3s 08-16-2002 11:34 AM

the acv is what the air pump is connected to, you can get block off plates from www.k2rd.com, or you could start clicking at the top of the page



mike

RX7CMS 08-16-2002 08:44 PM

hey mike the land of many cosmo's is there any with a good winshield or other parts


All times are GMT -5. The time now is 10:17 AM.


© 2024 MH Sub I, LLC dba Internet Brands