1st Generation Specific 1979-1985 Discussion

Shuttle Valve? Sounds Like A Lawnmower At Speed

Thread Tools
 
Search this Thread
 
Old 05-26-2005, 12:38 AM
  #1  
Junior Member
Thread Starter
 
micklongley's Avatar
 
Join Date: May 2005
Posts: 1
Default

Hello everyone, Im looking into buying an 85' rx with 139K miles. When idling and revving its great and has no bad symptoms. Once I go into gear and get up to some speed it starts getting really loud (like it revving really high) and sounds like a lawnmower almost. I put it in neutral going downhill and it still made the noise. The original owner said it was a "shuttle valve" problem. She said her mechanic said it was going to require dropping the trans and fixing the valve. The car is great besides this and I really like how it handles. Please advise on what this "shuttle valve" is because Ive done plenty of seaches and havent found anything about transmissions or this valve.



Thanks,

Mick
micklongley is offline  
Old 05-26-2005, 07:58 AM
  #2  
Senior Member
 
1revnrex's Avatar
 
Join Date: Jul 2004
Location: Vero Beach, Florida
Posts: 674
Default

I dont know of a "shuttle valve" but I know of a "shutter valve" that would give a loud hissing or honking noise if it was to screw up on ya. Do this, pull off the top of your air cleaner and listen to see if its coming from there and get back to me.







-Shawn
1revnrex is offline  
Old 01-08-2006, 01:32 AM
  #3  
Senior Member
 
RE_TurboFB's Avatar
 
Join Date: Dec 2005
Location: Oregon
Posts: 407
Default

Then rip that valve off and replace it with a block off plate..
RE_TurboFB is offline  
Old 01-08-2006, 11:59 AM
  #4  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

shutter valve is on top too, its under the carburator. when it gets really bad car will run on one rotor (its a huge vacuum leak)
j9fd3s is offline  
Old 01-14-2006, 11:38 PM
  #5  
Senior Member
 
RE_TurboFB's Avatar
 
Join Date: Dec 2005
Location: Oregon
Posts: 407
Default

The Sutter valve is a emissions control system

I took the intake manifold off my 12A, And removed the sutter valve( It looked like a mini choke butterfly) plus yanked the valve's solenoid that was connected to it. I filled the holes with some metal filler.



After that she ran alot better, But I dont have to pass DEQ



But I also removed the Air pump, Air control valve and the Port air valve a rats nest of vacuum hoses, andCovered the holes with block off plates..



I dont know about it having anything to do with the tranny.? Do you have a 5 speed or a automatic??
RE_TurboFB is offline  
Old 02-14-2006, 09:27 PM
  #6  
Junior Member
 
Nick16's Avatar
 
Join Date: Feb 2006
Posts: 13
Default

my brother's exhaust sounds exactly like a lawnmower at 2 through 5rpm hehe.



but hes missing a bolt in his header
Nick16 is offline  
Old 02-14-2006, 10:15 PM
  #7  
Senior Member
 
BeaterRX7's Avatar
 
Join Date: May 2005
Location: Choctaw, OK
Posts: 178
Default

Originally Posted by Nick16' post='801873' date='Feb 14 2006, 09:27 PM

my brother's exhaust sounds exactly like a lawnmower at 2 through 5rpm hehe.



but hes missing a bolt in his header
When I got pulled over the first thing the cop said to me was "That thing sounds like a chainsaw! You're gonna fix that, right?"

I put some Supertrapp tips on it so it sounds like a slightly quieter chainsaw. BTW, the shutter valve isn't a problem once you put Webers on it.
BeaterRX7 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
9BASE3
Kills
8
01-17-2008 08:18 PM
phinsup
Insert BS here
21
07-08-2006 08:47 AM
Rob x-7
Insert BS here
50
08-10-2005 02:44 AM
fritzfry
Insert BS here
32
07-12-2005 01:09 AM
9BASE3
Insert BS here
25
02-02-2003 08:06 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Shuttle Valve? Sounds Like A Lawnmower At Speed



All times are GMT -5. The time now is 07:05 AM.