1st Generation Specific 1979-1985 Discussion

Racing Beat Dellorto 48

Thread Tools
 
Search this Thread
 
Old 03-04-2003, 09:56 PM
  #1  
Junior Member
Thread Starter
 
llomcc's Avatar
 
Join Date: Mar 2003
Posts: 3
Default

Does anybody have a good photo of the oil metering and throttle linkage?

I need this asap.

thanks
llomcc is offline  
Old 03-04-2003, 10:14 PM
  #2  
Senior Member
 
Smog Fighter's Avatar
 
Join Date: Nov 2002
Location: Bakersfield, California
Posts: 569
Default

Wait for RacerX to reply, He has that setup.
Smog Fighter is offline  
Old 03-05-2003, 01:30 AM
  #3  
Senior Member
 
Racer X's Avatar
 
Join Date: Sep 2002
Location: Vanderhoof,BC(Canada)
Posts: 5,542
Default

Originally Posted by llomcc' date='Mar 4 2003, 07:56 PM
Does anybody have a good photo of the oil metering and throttle linkage?

I need this asap.

thanks
What about the throttle linkage?What view did you need? My page has some views of it. http://www.geocities.com/rxracer2002/Rx-racer1.html if that doesn't help post it here.I'll keep a eye for you tommorow morning.I can grab some shots of it from any angle you need.I built a custom cable bracket because I heard the stock one was prone to bending.I want to sell mine but too many people stick to the EFI setup on thier cars.I want the holley setup but I have a hole "other" agenda so I'm not worried.Carb works awesome.
Racer X is offline  
Old 03-05-2003, 01:39 AM
  #4  
Senior Member
 
Racer X's Avatar
 
Join Date: Sep 2002
Location: Vanderhoof,BC(Canada)
Posts: 5,542
Default

I forgot to mention.Spoolin also has a DHLA 48 like mine on a 12a if that helps you some.Mine is on a -SE 13b 6port.
Racer X is offline  
Old 03-05-2003, 08:01 PM
  #5  
Junior Member
Thread Starter
 
llomcc's Avatar
 
Join Date: Mar 2003
Posts: 3
Default

Thanks for the reply, I need a close up of the oil metering oil and linkage connection.

I saw your photo's but was not able to see what I was looking for.

thanks again for your time on this.

Regards

85 GS 13b 4port
llomcc is offline  
Old 03-05-2003, 08:53 PM
  #6  
to infinity & beyond, me
 
treceb's Avatar
 
Join Date: Aug 2001
Location: santurce
Posts: 5,124
Default

oil metering. i used the oil metering locations on the engine and LIM. i know the dell has 2 on top, but i used a stock OMP with stock tubing. it seems to work fine, but i havent driven the car under load yet.
treceb is offline  
Old 03-05-2003, 09:27 PM
  #7  
Junior Member
Thread Starter
 
llomcc's Avatar
 
Join Date: Mar 2003
Posts: 3
Default

Only the racing beat dell's had the oil metering modification and that is what I'm trying to determine with detailed photo's of that part of the carb.

best regards
llomcc is offline  
Old 03-06-2003, 01:15 AM
  #8  
Senior Member
 
Racer X's Avatar
 
Join Date: Sep 2002
Location: Vanderhoof,BC(Canada)
Posts: 5,542
Default

I bent my 13B 6 ports rod right at the hole for it on the throttle linkage.Then used a pair of washers and cotter pins to hole it to the linkage.I'll try to get a pic tommorow.Its under 3 inches of snow right now.Those nipples on top go to the Distributer for the vaccum.They only work right one way so you'll know if its on it right.I was going to use the OMP rod off the stock 12a I had but it was 3 inches too short and the SE one was too long so I bent it accordingly and cut off the excess metal.Works good.I'll try for a pic tommorow.



Luis
Racer X is offline  
Old 03-06-2003, 01:28 PM
  #9  
Senior Member
 
Racer X's Avatar
 
Join Date: Sep 2002
Location: Vanderhoof,BC(Canada)
Posts: 5,542
Default

Here you go.Sorry if they are blurry.Its -20 degress celcius right now.
Racer X is offline  
Old 03-06-2003, 01:30 PM
  #10  
Senior Member
 
Racer X's Avatar
 
Join Date: Sep 2002
Location: Vanderhoof,BC(Canada)
Posts: 5,542
Default

another one
Racer X is offline  


Quick Reply: Racing Beat Dellorto 48



All times are GMT -5. The time now is 10:59 PM.