alright alright, i think i got it now, i looked at the harness i fooked up and theres like three of the same wires coming out of 1 slot on the connecter head (black with yellow stripes) doesnt matter witch one i use?? i also tried looking for the wiring diagrams on ebay for cheap but they dont have any



thanks

its black with white

Is it ok to scan a wiring diagram and post it on the thread???

yes, of course

I've attached the engine electrical chapter of the 2nd gen workshop manual, it may be of assistance to you.

https://www.nopistons.com/forums/pub...DIR#>/wink.png

If I can find my 1st gen workshop manuals, I'll post that one up too.

grrrr... i found the wire that i cut on accident, but i cant see to find were it came from... i tried the wires from the steering box harness, but i cant see to find it.. if anyone can scan the wiring diagrams for me, that would help me alot!!!



thanks again

Here ya go... hope it helps! https://www.nopistons.com/forums/pub...IR#>/smile.png

thats like reading alien code

Well if ya look you can find the battery, Starter, Ignition switch etc..... The lines coming off the componets are wires and you can identify them by color code next to them i.e. BY, LW.......



CODE:

B=Black

Br=Brown

G=Green

Gy=Grey

L=Blue

Lb=Light Blue

Lg=Light Green

O=Orange

R=Red

W=White

Y=Yellow



Once you find the starter on the diagram you can see 4 wires coming from it. one going to the battery. One going to the fusible link then to the hot start relay LW (Blue-White). One going to the ignition switch BY (Black-Yellow). The ground (It touching the tranny), And then there is a Black with white strip wire going to a inhibitor switch, But only on automatics.... Hope this helps.......

ya im automatic,,, wheres the inhibitor switch??