Project Kramer Dyno - 370 Rwhp!
#1
Well,
We had a really nice time on Saturday with the
MRCCFL crew.
We had a Dyno Event, a BBQ, and a tour oss the SpeedSource shop which is building competitive RX-8's for Daytona!
I have a REALLY Good Video of my Car doing the Dyno runs, but I don't have a host that can support many users & high bandwidth.
Anyway - I did Three pulls.
1) Stock Wastegate Spring at 9 PSI = 270 RWHP
2) Boost set to 12 PSI (What I normally use) = 315 RWHP
It got a little lean at the top, so we decided to re-jet it for the higher boost runs for safety.
Then:
3) Boost set to 17 PSI = 370 RWHP.
All Done on a Holley Blow-Through system, on regular pump gas.
Here is the Dyno sheet with all three runs:
We had a really nice time on Saturday with the
MRCCFL crew.
We had a Dyno Event, a BBQ, and a tour oss the SpeedSource shop which is building competitive RX-8's for Daytona!
I have a REALLY Good Video of my Car doing the Dyno runs, but I don't have a host that can support many users & high bandwidth.
Anyway - I did Three pulls.
1) Stock Wastegate Spring at 9 PSI = 270 RWHP
2) Boost set to 12 PSI (What I normally use) = 315 RWHP
It got a little lean at the top, so we decided to re-jet it for the higher boost runs for safety.
Then:
3) Boost set to 17 PSI = 370 RWHP.
All Done on a Holley Blow-Through system, on regular pump gas.
Here is the Dyno sheet with all three runs:
#2
My tuner believes on C-16 (Race Gas) I could easily go to 23 PSI safely which should produce about 460 RWHP.
I think I'll try that combination at the track for the hell of it
So, who's going to host the VIDEO's?
I have:
I think I'll try that combination at the track for the hell of it
So, who's going to host the VIDEO's?
I have:
#5