b_lloyd83

i just bought a 1982 rx7 at an auction, and i cant get it to run. ive got tons of spark, plenty of fuel, and 65psi of compression. at best, i can get it to fire once, and its a little, barely counts fire before i have to take out all of the plugs and clean the fuel off of them. ive tried moving the timing all over the place and still nothing. any suggestions? ill also part it out at this point, let me know if you want anything. thanks

phinsup

65 psi doesn't seem too good. You getting that on all three blows?

teknics

65 psi doesnt sound too good.



when you crank it without spark plugs in it does a lot of fuel come out? perhaps its flooded?



not to sure, nor helpful, sorry.



kevin.

b_lloyd83

yeah, it floods all the time. but when it does i take the plugs out and clean them so that isnt the problem. i get 65 psi or real close to that for all the holes. any suggestions on where to post my car to part it out? also, how or can you post pictures? thanks

j9fd3s

try push starting it

ArmyOfOne

what type of carb setup?

b_lloyd83

i dont know what type of carb it is, its a 12a motor. if that helps

pbrx7

hey gents, this is the exact same problem i'm having with my car. lots of spark, fuel, and compression. no run.



demon 625cfm

jaytech intake

carter fuel pump

holley reg

83 dizzy

mallory ignition (leading)



i'm at a loss as well. can you all help us figure this out?