Have any of you dont swaps on rear ends?
Thread Starter
Banned
Joined: Jan 2002
Posts: 2,068
Did you notice any faster pickup between the 3.90 gears compared the the GSLSE 4.07?
Heres my problem..
I found some nice *** clean 15in Enkies...that fit 4x110
I already have the GSLSE front set up(BUT not installed)
its hard for me to get an GSLSE rear end..
I can get a GSL rear very easy..
They are not the same year as mine so I will have to get the drive shaft also which is no problem..
I want to stay with the GSLSE conversion I had in mind..AND I have brand new 16 in Yokahamas that I been saving to use..
Some one help me!!!!
Heres my problem..
I found some nice *** clean 15in Enkies...that fit 4x110
I already have the GSLSE front set up(BUT not installed)
its hard for me to get an GSLSE rear end..
I can get a GSL rear very easy..
They are not the same year as mine so I will have to get the drive shaft also which is no problem..
I want to stay with the GSLSE conversion I had in mind..AND I have brand new 16 in Yokahamas that I been saving to use..
Some one help me!!!!
Senior Member
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Why don't you just run a GSL setup.Sell the tires off with the front SE setup.And make some money back.4x110 wheels are hard to find.I might look at some mustang 4 bolt rims to see if they fit.I really don't want to swap everything over.
Senior Member
Joined: Nov 2001
Posts: 664
Originally Posted by Racer X' date='Nov 4 2002, 07:47 PM
Why don't you just run a GSL setup.Sell the tires off with the front SE setup.And make some money back.4x110 wheels are hard to find.I might look at some mustang 4 bolt rims to see if they fit.I really don't want to swap everything over.
Just get the Enkei's and sell the -SE **** and the 16" tires to offset the cost of the rims and the GSL rear.
Senior Member
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Originally Posted by Felix Wankel' date='Nov 4 2002, 06:03 PM
Mustang rims only fit the SE pattern.
Just get the Enkei's and sell the -SE **** and the 16" tires to offset the cost of the rims and the GSL rear.
Just get the Enkei's and sell the -SE **** and the 16" tires to offset the cost of the rims and the GSL rear.
Thread Starter
Banned
Joined: Jan 2002
Posts: 2,068
Originally Posted by Racer X' date='Nov 5 2002, 04:16 AM
[quote name='Felix Wankel' date='Nov 4 2002, 06:03 PM']Mustang rims only fit the SE pattern.
Just get the Enkei's and sell the -SE **** and the 16" tires to offset the cost of the rims and the GSL rear.
Just get the Enkei's and sell the -SE **** and the 16" tires to offset the cost of the rims and the GSL rear.
I was always told that the mustang pattern was like
4x4.5 which is 4x114
I can get this GSL rear like the cost of water..I have one more resort I will check out before going to the GSL..
I found a SE rear like 45 mins away like 4 months ago workin in that area..The guy said If I didnt get it within the next couple days it would be gone..Well I need to take a trip out there and check..
It was sitting outside so the rear is mostly sieze..but I can rebuilt it..I hope..
Senior Member
Joined: Nov 2001
Posts: 664
Originally Posted by Racer X' date='Nov 5 2002, 03:16 AM
Sorry to have to be the bearer of bad news.The 4 bolt rustang is a 4x108 pattern as the SE uses a 4x114.That doesn't come close to fitting the SE pattern.
Senior Member
Joined: Aug 2002
Posts: 4,848
From: Mike is a Liar!
Originally Posted by Felix Wankel' date='Nov 5 2002, 10:29 AM
[quote name='Racer X' date='Nov 5 2002, 03:16 AM']
Sorry to have to be the bearer of bad news.The 4 bolt rustang is a 4x108 pattern as the SE uses a 4x114.That doesn't come close to fitting the SE pattern.
Sorry to have to be the bearer of bad news.The 4 bolt rustang is a 4x108 pattern as the SE uses a 4x114.That doesn't come close to fitting the SE pattern.
lmao
Senior Member
Joined: Nov 2001
Posts: 664
You know, now that I think about it, the guy that I bought the wheels on my old Mustang from wasn't exactly the brightest knife in the elevator. No wonder his wheel place went under. (he said it was a 4x4.5" pattern)
They definitely did not fit the 4x110 pattern, I know that much. I tried to put them on my 81 S (out of curiosity) and they did not fit at all.
They definitely did not fit the 4x110 pattern, I know that much. I tried to put them on my 81 S (out of curiosity) and they did not fit at all.
Thread Starter
Banned
Joined: Jan 2002
Posts: 2,068
Originally Posted by Felix Wankel' date='Nov 5 2002, 03:12 PM
You know, now that I think about it, the guy that I bought the wheels on my old Mustang from wasn't exactly the brightest knife in the elevator. No wonder his wheel place went under. (he said it was a 4x4.5" pattern)
They definitely did not fit the 4x110 pattern, I know that much. I tried to put them on my 81 S (out of curiosity) and they did not fit at all.
They definitely did not fit the 4x110 pattern, I know that much. I tried to put them on my 81 S (out of curiosity) and they did not fit at all.
Senior Member
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Originally Posted by Felix Wankel' date='Nov 5 2002, 10:29 AM
[quote name='Racer X' date='Nov 5 2002, 03:16 AM']
Sorry to have to be the bearer of bad news.The 4 bolt rustang is a 4x108 pattern as the SE uses a 4x114.That doesn't come close to fitting the SE pattern.
Sorry to have to be the bearer of bad news.The 4 bolt rustang is a 4x108 pattern as the SE uses a 4x114.That doesn't come close to fitting the SE pattern.
I've read about it on several websites saying the early rustang has a 4x108.If your saying it's 4x114 then it might be seeing as you have owned one.
