Finally!
09-25-2002, 06:05 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Richmond, KY
Posts: 595
After over a year, with alot of help from my friend Guch, I finally got my car back on the road. The Turbo conversion is amost complete. Just getting the bugs worked out on it. What little bit that I've gotten to drive it so far, the only thing that I can say it is going to be FAST. Can't wait.
09-26-2002, 04:05 AM
#6
Banned
Join Date: Jan 2002
Posts: 2,068
****...Nice set up ..if you dont mind...can you post your set up?
What size/brand turbo?
I want to see what you intercooler looks like..what is it off from what brand?etc..
What year engine..
The set up is nice..and what pattern rims are them?
for a GSLSE?
Im asking these questions..cause I got a first gen..and want to convert it to turbo..I want to stay with the 12A for have it forced through the top of the carb..
Any tips you can give me ..let me know plz...
My AIM is aznbossplayer
if you have AIM contact me plz..
Howmany HP you think you will be running ..and what port did you go with?
What size/brand turbo?
I want to see what you intercooler looks like..what is it off from what brand?etc..
What year engine..
The set up is nice..and what pattern rims are them?
for a GSLSE?
Im asking these questions..cause I got a first gen..and want to convert it to turbo..I want to stay with the 12A for have it forced through the top of the carb..
Any tips you can give me ..let me know plz...
My AIM is aznbossplayer
if you have AIM contact me plz..
Howmany HP you think you will be running ..and what port did you go with?
09-26-2002, 03:29 PM
#10
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Richmond, KY
Posts: 595
Thanks guys! I'll try to answer a few of the questions.
The "block" is an 87 Turbo with everything else from an 89 Turbo. Everything is pretty much stock for now, except for the large street port and Blitz BOV.
The intercooler is from a Starion. Figured I would put it behind the mesh for the bushwhack effect. If your standing in front of the car, it's very hard to see. They will never know what hit them. :smirk:
The rims are ROH Snypers and are non-SE.
About the throttle body cap, I didn't know there was a difference. What does the other look like?
I've gotta few bugs to work out in the car, being it's been sitting for over a year. I can't wait to get it all squared away.
Not sure on HP yet. I want to get to 300 rwhp for now.
The "block" is an 87 Turbo with everything else from an 89 Turbo. Everything is pretty much stock for now, except for the large street port and Blitz BOV.
The intercooler is from a Starion. Figured I would put it behind the mesh for the bushwhack effect. If your standing in front of the car, it's very hard to see. They will never know what hit them. :smirk:
The rims are ROH Snypers and are non-SE.
About the throttle body cap, I didn't know there was a difference. What does the other look like?
I've gotta few bugs to work out in the car, being it's been sitting for over a year. I can't wait to get it all squared away.
Not sure on HP yet. I want to get to 300 rwhp for now.