i have turbo and everything hooked up is just ready to hook up the aftermarket ecu but 1) i dont have it 2) i havent decide wich ecu to buy 3) i dont have the money. so im planning to put the stock wiring harness back and the stock ecu to started. does it hurt the engine if i just start it with the stock ecu? is just to start it no run it. thanks.

 

Since you are using a 2.5" exhaust and a stock turbo, I'm guessing that you are not building a dyno queen, so why not just wire in the stock ECU with a piggy back.



Ryan

 

yeah im not planning for hi horsepower right now the engine is old and i dont want to blow a apex real fast and anyway i dont need that much to kill most of the ricer where i live but anyway thanks

 

You could always use a rising rate fuel pressure regulator.

 

it would prolly run ok, just dont boost it.



mike

 

You already have the IC Piping in place too?

 

Then what is the point of the turbo??

 

yep, 2.5 from the turbo to the intecooler and from the intercooler to the TB plate. i put two reducer, one in the turbo and the other in the TB plateand the pipe, because of the way i put the intecooler i didnt have to bend or take nothing out , ex for the U bend i had to buy to hook the pipe with the TB. but yes is almost ready, ex for the ecu. but anyway i was too quick. i not taking the car out until spring .

 

Thats a good idea, I did this, this morning, with the help of a little ice.

 

ouch!!!!