[quote name='Dysfnctnl85' date='May 8 2005, 11:06 PM']Yeah, that confirms what the guys on the Club said...since the outer bearing is the same, one would think the rotors and hubs would fit on just peachy. Pictures would make this much easier. I'm going to stop buy Pull-A-Part tomorrow and see if the '87 they have there is a 5-lug.



If I end up doing this I'll do a nice writeup with pictures. https://www.nopistons.com/forums/pub...IR#>/smile.png


[/quote]





Sweet, you're gonna either be pinned to the seat or hanging from the harness in your car eh? https://www.nopistons.com/forums/pub...#>/biggrin.png

[quote name='1revnrex' date='May 8 2005, 10:32 PM']Sweet, you're gonna either be pinned to the seat or hanging from the harness in your car eh? https://www.nopistons.com/forums/pub...#>/biggrin.png


[/quote]



That's the goal!



I've never driven a car w/o ABS and I've never driven a car as fast as I HOPE this one will be.



I just want to make sure I don't put it into a tree on the maiden voyage https://www.nopistons.com/forums/pub...DIR#>/wink.png.

Good news fellas, I found some 4 piston calipers waiting to be taken at a local junkyard.



On Wednesday I'm going to pack the toolbox and after work run by and take everything I need. I'll be rebuilding the calipers and polishing them up a bit, but a writeup will follow the installation of the new hubs and calipers.

[quote name='Dysfnctnl85' date='May 9 2005, 10:39 PM']Good news fellas, I found some 4 piston calipers waiting to be taken at a local junkyard.



On Wednesday I'm going to pack the toolbox and after work run by and take everything I need. I'll be rebuilding the calipers and polishing them up a bit, but a writeup will follow the installation of the new hubs and calipers.


[/quote]





https://www.nopistons.com/forums/pub...IR#>/bigok.gif Hook it up, Im waiting to see one come thru the yard and I think Im gonna do it too.

Well ******'-A I didn't get the strut catridge assembly and apparently I need that. I disassembled the new calipers and took the old brakes off the car only to realize that the strut assembly for the FBs is vastly different than what's necessary to mount my new hubs. https://www.nopistons.com/forums/pub...1047683664.gif



Looks like I'll be making a trip back to Pull-A-Part sometime this week. https://www.nopistons.com/forums/pub..._DIR#>/sad.png

in theory all you need is an inner bearing thats fits the fc hub on the fb spindle

[quote name='j9fd3s' date='May 22 2005, 01:29 PM']in theory all you need is an inner bearing thats fits the fc hub on the fb spindle


[/quote]



Hmmmm...



Here are pics of the disassembly.



[attachment=31055:attachment]



[attachment=31056:attachment]

1 more:



[attachment=31057:attachment]

I tried playing around with your idea and got the inner bearing OUT of the old hub but I can't seem to get the inner bearing out of the FC hub. The FB one was held in by a metal strip and rubber, but it appears the FC one is held in only by rubber and I don't want to risk breaking anything...

Is it even possible for the FB inner bearing to fit in the FC hub?



https://www.nopistons.com/forums/pub..._DIR#>/sad.png