NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   1st Generation Specific (https://www.nopistons.com/1st-generation-specific-16/)
-   -   2 Front Tires Gone (https://www.nopistons.com/1st-generation-specific-16/2-front-tires-gone-32459/)

jebenkurac 01-24-2004 05:32 PM

my 2 front tires are completely destroyed because of the rediculously large amount of play in my steering. one blew out last night and the other one is so close to going that i dont even drive my car. the part of the tread closest to the center of the car on both tires is already worn down to the metal wires and ive only got 2-3,000 miles on them. i am about ready to sell this thing and get something that isnt 2 years my junior.

Racer X 01-24-2004 05:39 PM


Originally Posted by jebenkurac' date='Jan 24 2004, 03:32 PM
my 2 front tires are completely destroyed because of the rediculously large amount of play in my steering. one blew out last night and the other one is so close to going that i dont even drive my car. the part of the tread closest to the center of the car on both tires is already worn down to the metal wires and ive only got 2-3,000 miles on them. i am about ready to sell this thing and get something that isnt 2 years my junior.

Sounds like you need a new steering rack and front wheel alignment.

jebenkurac 02-03-2004 02:41 PM

when i took my car in i specifically told the guy to check the steering box, he said all that **** is good and tight and that he did an alignment and i have a big problem. my car sat for so many years without being driven before i bought it that the actual frame has sagged and that is causing my two front strut towers to have some seriously messed up toe alignment. he said that there isnt anyone who makes camber plates for it and the only solution would be to take it to an autobody shop and have the frame bent; which even then isnt an exact science. ...any thoughts, especially on camber plates

RotaryXSevn 02-03-2004 02:56 PM

here are some camber plates...http://www.mazdatrix.com/pictures/racing/r13-1.jpg





its race suspension haha check it out, http://www.mazdatrix.com/r-susp-1.htm

LethalRotor 02-03-2004 03:35 PM

i just blew out one of my front tires too. mine was because i was having too much fun in the snow though. on top of being old tires. I work at a body shop, and i can tell you, no reputable shop would even think about doing that for you. only hacks would bend your frame OUT OF SPEC. there are the camber plates you just found out about, but obviously something suspension wise and possibly steering wise needs to be replaced. unless your car is lowered a lot, the camber plates are only gonna bypass the problem, not solve it. don't know how much you know about your mechanic, but you might want to get another opinion from someone else that actually wants to fix something.

RotaryXSevn 02-03-2004 03:51 PM

hey he just said camber plates and i just showed him i didnt say ANYTHING about fixing the problem

jebenkurac 02-03-2004 05:11 PM

well ive got the 15" roh snyper's and ive redone the rest of the suspension so it rides an inch lower, inch and a half in the back.

LethalRotor 02-04-2004 10:25 AM


Originally Posted by RotaryXSevn' date='Feb 3 2004, 01:51 PM
hey he just said camber plates and i just showed him i didnt say ANYTHING about fixing the problem

i'm not saying your wrong. just making sure he knows that they wont permanatly solve his problem. now he says his cars lowered, so he might want them anyway... thanx for the link though.

jebenkurac 02-04-2004 12:48 PM

im not even sure if theyll fit w/o a lot of modification. because on the mazdatrix site they advertise them as going with that certain model tokico's they sell; i do have tokico's but i dont remember what model, i got them from victoria british and the cataloge is at home. plus $260 is a healthy chunk of change just to see if this works.


All times are GMT -5. The time now is 12:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands