|
Hey whats up guys Im am new to the whole rotary thing but I hope to learn alot through this site and all of its members. I just picked up a 83 rx-7 for 200 bucks. It runs ok but has high miles(170,xxx). I was wondering if I should waste my time on fixing the motor up that is in there or buying another motor all together. Any advice that you guys and gals could give me would be great.
Thanks David |
Run it till it dies. I have 186k on my 2nd gen and it still runs fine, 12A motors tend to go the better part of forever.
Keep oil in it, don't overheat it. |
Originally Posted by Rotarydragon' date='Mar 11 2005, 10:59 AM
Run it till it dies. I have 186k on my 2nd gen and it still runs fine, 12A motors tend to go the better part of forever.
Keep oil in it, don't overheat it. Hey whats up how much would another rotary motor like that cost or would I be better of putting adifferent motor in it. I almost want to make a freak, 2300pound car+ Ford 302 SB=mid to low 11s with traction? |
you can leave now if youre actually gonna put a piston motor in the car. just leave the car like it is, it should be reliable for a while
|
Originally Posted by Shane.Trammell' date='Mar 11 2005, 11:11 AM
you can leave now if youre actually gonna put a piston motor in the car. just leave the car like it is, it should be reliable for a while
Well i really don't want to just drive it till it dies I would like to fix it up. I would alost like to turn it into a drift car. But I would like recomendations on a motor to put in it. |
Originally Posted by 83Rx-7' date='Mar 11 2005, 11:20 AM
Well i really don't want to just drive it till it dies I would like to fix it up. I would alost like to turn it into a drift car. But I would like recomendations on a motor to put in it.
anything with rotors, you can do a turbo swap, you can turbo the 12a, you can sc the 12a, you can do a three rotor... possibilities are endless, just depends on what you can do and how much money you have |
Originally Posted by Shane.Trammell' date='Mar 11 2005, 11:27 AM
anything with rotors, you can do a turbo swap, you can turbo the 12a, you can sc the 12a, you can do a three rotor... possibilities are endless, just depends on what you can do and how much money you have
how much oil does my motor take with and without changing the filter? |
should say here: http://www.wankel.net/~krwright/files/1980...Lubrication.pdf
there is a link here in the 1st gen section in a thread pinned at the top with a link to the factory service manuals. the link is like 3 or 4 posts from the top heres the link to the 85 factory service manual, the stuff should be the same just make sure youre looking at the 12a stuff http://www.wankel.net/~krwright/cars/rx7/85_manual.html |
Originally Posted by 83Rx-7' date='Mar 11 2005, 11:20 AM
Well i really don't want to just drive it till it dies I would like to fix it up. I would alost like to turn it into a drift car. But I would like recomendations on a motor to put in it.
Do a TII swap into it, have the 12A rebuilt with a streeport and large tubo set up. Run atkins rotary super charger. Just don't put a V8 in it, it hoses the handling and makes it just another sports car. You can get low 11's out of a rotary easy enough. https://www.nopistons.com/forums/pub...IR#>/bigok.gif |
Originally Posted by Rotarydragon' date='Mar 11 2005, 11:57 AM
Do a TII swap into it, have the 12A rebuilt with a streeport and large tubo set up. Run atkins rotary super charger.
Just don't put a V8 in it, it hoses the handling and makes it just another sports car. You can get low 11's out of a rotary easy enough. https://www.nopistons.com/forums/pub...IR#>/bigok.gif Thanks alot on the recomendation of what motor to put in it |
| All times are GMT -5. The time now is 08:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands