NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   Suspension, Wheels, Brakes, Tires (https://www.nopistons.com/suspension-wheels-brakes-tires-21/)
-   -   What Offset's I Need To Go With 18 Inch Rims? (https://www.nopistons.com/suspension-wheels-brakes-tires-21/what-offsets-i-need-go-18-inch-rims-22960/)

Rx7aholic 08-18-2003 09:29 AM

It's for 93 Rx7 I have the stock front springs and Racing beat rear springs Thanks, khris

Srce 08-18-2003 11:03 AM

Width?

Rx7aholic 08-18-2003 09:27 PM

18x8 all 4 corners

vosko 08-23-2003 12:23 PM

normally they want you to go 18x8.5 front and 18x9.5 rear.... what kind of rims do you want

Rx7aholic 08-24-2003 08:59 PM

I was thinking of Privat Farhens from tires.com, But I have change my mine so I thinking getting some real 3 peice oz. Khris

rsjetjock 08-26-2003 10:14 AM

For what it is worth I am running +37 front 18X 8.5

and +41 rear 18 x 10



I've had no problems with these offsets. Running on an FD.

Silver Ninety Three 08-26-2003 10:19 AM

18x8 is too narrow. If you had coilovers I would go with 18x10s all round or 9's in front. Get at least a 9" wide wim for the rear. No point in upgrading if you don't go wider. You should be able to fit an 18x8.5 and 18x9.5 front to rear if you choose the correst offset.

Rx7aholic 08-27-2003 09:04 PM

Ok what about these setup, offset is 43, 17x8.5 or 17x9 for the front, and Rear 17x10 I don't have coil-over but I did lower the rear with racing beat springs, will this setup work? Khris

amp 08-28-2003 02:09 AM

imo... i wouldnt go past 9 in the front khris..

whyd you just lower the rear..

93 R1 08-28-2003 07:55 AM

I run 18x9.5 +50 on all 4 corners. Stock R1 suspension


All times are GMT -5. The time now is 02:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands