My Phone Dial wheels
16x8 5.500 inch back space weld racing evolutions 225/50/16 front 245/45/17 rear needed a 5/16" spacer in the front to clear the spring perch for my bilstein coilovers.... |
That looks saweet! I love it! https://www.nopistons.com/forums/pub...1047683894.gif
|
ELITE https://www.nopistons.com/forums/pub...1047683894.gif
one question though, why do you have larger diameter in the rear? also offset please. |
[quote name='drftk1d' date='May 24 2005, 08:39 PM']ELITE https://www.nopistons.com/forums/pub...1047683894.gif
one question though, why do you have larger diameter in the rear? also offset please. [snapback]717341[/snapback] [/quote] hrm... the backspace is 5.500 inches. I calculated that to be +25 offset. But reted said that isn't correct. So the formula I was using must have been wrong. So in truth I do not know what the offset is... But the wheels are engraved with 5.500 inches B/S which I assume to be backspace. as for the larger diameter comment. OPPS TYPO. sorry about that. it's actualy 245/45/16 in the rear. |
[quote name='Cheers!' date='May 24 2005, 10:26 PM']hrm... the backspace is 5.500 inches. I calculated that to be +25 offset. But reted said that isn't correct. So the formula I was using must have been wrong. So in truth I do not know what the offset is... But the wheels are engraved with 5.500 inches B/S which I assume to be backspace.
as for the larger diameter comment. OPPS TYPO. sorry about that. it's actualy 245/45/16 in the rear. [snapback]717373[/snapback] [/quote] i did the math. those are +38mm offset https://www.nopistons.com/forums/pub...IR#>/bigok.gif i made a diagram on a piece of paper.......i'm sure there are calculators but its all just basic math.... |
[quote name='vosko' date='May 25 2005, 12:39 AM']i did the math. those are +38mm offset https://www.nopistons.com/forums/pub...IR#>/bigok.gif
i made a diagram on a piece of paper.......i'm sure there are calculators but its all just basic math.... [snapback]717455[/snapback] [/quote] I'm curious how you calculated it... |
0 offset would be 4" backspace on an 8" wheel. Difference between 4 and 5.5 is 1.5, or +38.1mm.
|
They look good. Those are the ultimate phone dials!
|
[quote name='TYSON' date='May 25 2005, 09:27 AM']0 offset would be 4" backspace on an 8" wheel. Difference between 4 and 5.5 is 1.5, or +38.1mm.
[snapback]717540[/snapback] [/quote] dammit i am not the only one who can do basic math!!!! you bastard https://www.nopistons.com/forums/pub...1047683785.gif its kind of hard to do that in your just make a picture and put the centerline of the wheel and where the hub is. offset is the distance of the wheel hub from the centerline like tyson just pointed out https://www.nopistons.com/forums/pub...IR#>/bigok.gif |
those wheels look really nice! like a revolver.
very nice looking car |
All times are GMT -5. The time now is 04:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands