looking to have a resource of what you guys have your rx7s alignment set at. be it for street or track. if you can please list what year model and type of driving you do with your car.



and if anyone knows the factory settings for each gen car, it wuold be appreciated.

thanks

up for street use

:-)

If you guys want every generations stock alignment settings, I can get them possibility on Monday as long as the boss isn't looking lol

like to know this as well

K, I'll see if I can print the specs off of the alignment rack at work or maybe even mitchel

for the 1st gen.



stock 12A is like +1 camber, 4 caster and lots of toe in in the front. rear is solid axle and non adjustable.

stock GSL-SE is 0 camber, 4 caster, and lots of toe.



stock alignment wants it to be STABLE and understeer.



a good STREET alignment is to get as much negative camber as you can (-1 is nice), set toe to zero, or just slightly in (1/8").



a RACE alignment depends on the TIRES, so it could have camber in the -2.5 to -6 range, with some toe OUT. rear needs about -1 camber



on an FC.



stock Front is like 0 camber, 4? castor, and again lots of toe in

stock Rear is -1 to -1.5 camber, and lots of toe.



a good STREET alignment, is to run as much negative camber you can get in the front (-.5 is about all you can get). i like zero toe in the front.



in the rear, ive played with the rear toe, it makes a HUGE difference in the FEEL of the car. stock toe in makes the car feel really stable and planted. zero makes the car turn in a lot better, but to make it work you need to be on the gas, which is hard to do on the street. so i like a little toe in, very little



the FD i lack experience with.