im going to put a turbo on my 86 rx-7 and i was wanting to know where the oil lines hook up to. do i have to tap the oil pan? thanks

Mark

there is a hard line on the TII's that runs from the front end plate accross the front of the engine to provide the feed for the turbo. I don't remeber if N/A's have a fitting there or not. If not I'm not sure what you should do for oil. Perhaps use one of those tempture block that go under the oil filter as a soruce.



For oil return you can either weild a fitting to the oil pan but it would eaiser to get a TII front cover. It has the oil return built into it.