T04e Fuel Needs

Reply Subscribe

Thread Tools

Search this Thread

05-29-2004, 05:46 AM

Rotorfreak

Senior Member

Thread Starter

Join Date: Aug 2003

Posts: 145

I need to know what i would need to run 10psi of boost on a T04e safely... and then if i want to run 16-18 psi..

I was thinking of going for the kgparts secondary fuel rail and 1680cc bosch injectors..

what fuel pump is recommended with that and will i need a primary rail and bigger primaries too??

Thanks

05-29-2004, 07:03 AM

jspecracer7

Senior Member

Join Date: May 2002

Location: Okinawa, Japan

Posts: 4,928

the 1680cc kit from Keith is PLENTY fuel for a T-04E. I would suggest a walboro pump as the intank pump.

05-29-2004, 07:27 AM

Rotorfreak

Senior Member

Thread Starter

Join Date: Aug 2003

Posts: 145

should i buy the walbro 255lph that rx7 store is offering for $110 ?

05-29-2004, 12:43 PM

1Revvin7

Senior Member

Join Date: Oct 2001

Location: Peoria, AZ

Posts: 10,906

Quote:

Originally Posted by Rotorfreak' date='May 29 2004, 07:27 AM

should i buy the walbro 255lph that rx7 store is offering for $110 ?

Just make sure its a high pressure 255lph unit.

05-29-2004, 04:37 PM

Dramon_Killer

Senior Member

Join Date: May 2003

Posts: 1,784

You can get those off ebay for 90 bucks shipped. It comes in a kit.

05-30-2004, 11:13 AM

Rotorfreak

Senior Member

Thread Starter

Join Date: Aug 2003

Posts: 145

Quote:

Just make sure its a high pressure 255lph unit.

Thats what it says on the rx-7store.net site...

On rx7trix it says that its a complete kit and the picture they show is somewhat different and the pump is $10 more there..

Also how is the walbro 255lph at idle on a FD??