|
Not to jump the gun on the completion of my project, but what sort of checklist do I need to go through before (attempting) to crank it wrt to the turbo? Do I need to do anything with the bearings, maybe squirt some oil in it or something?
Maybe cut some of the blades on the compressor wheel? Hehe. TIA! |
post up cause I have that in a 1.00 divided. Hope it screams.
|
Just pull the EGI fuse and crank it for a few seconds. This will get the oil flowing into the turbo before the thing actually starts spinning up.
|
Originally Posted by rfreeman27' date='Jan 30 2005, 11:29 PM
Just pull the EGI fuse and crank it for a few seconds. This will get the oil flowing into the turbo before the thing actually starts spinning up.
Ahem, huh? You mean don't let it spark? Oh and mine is also 1.00 divided https://www.nopistons.com/forums/pub...IR#>/smile.png. |
Bump for T04R's....WoooT!
Yeah, its kinda like the unflooding procedure, except without the flood https://www.nopistons.com/forums/pub...IR#>/smile.png oh, BTW...mine is a 1.32 divided https://www.nopistons.com/forums/pub...IR#>/boink.gif |
Originally Posted by Comitatus' date='Jan 31 2005, 12:47 PM
Bump for T04R's....WoooT!
Yeah, its kinda like the unflooding procedure, except without the flood https://www.nopistons.com/forums/pub...IR#>/smile.png oh, BTW...mine is a 1.32 divided https://www.nopistons.com/forums/pub...IR#>/boink.gif I'm praying I can get it running by this weekend. Waiting on IC piping and an alternator clip from Mike (j9fd3s). |
Originally Posted by Comitatus' date='Jan 31 2005, 12:47 PM
Bump for T04R's....WoooT!
Yeah, its kinda like the unflooding procedure, except without the flood https://www.nopistons.com/forums/pub...IR#>/smile.png oh, BTW...mine is a 1.32 divided https://www.nopistons.com/forums/pub...IR#>/boink.gif |
Before you fire it up you're going to want to prime the whole oil system by cranking it till you get oil pressure. It's going to take more then a few seconds of cranking to fill the oil cooler so don't fret if you have to crank for 20-30 seconds before you get pressure. So just go into your haltech and turn off the fuel injectors while cranking. Once you get oil pressure turn the injectors back on and with a timing light hooked to the #1 leading wire go ahead and try to fire it up the first time. If you get lucky like I did it will fire up right away and then you want to zero in your timing.
|
Originally Posted by Dysfnctnl85' date='Jan 31 2005, 01:02 PM
I'm praying I can get it running by this weekend.
Waiting on IC piping and an alternator clip from Mike (j9fd3s). Take lots of pics and video if you can when you start it up! What IC are you running? |
Originally Posted by l8t apex' date='Jan 31 2005, 02:25 PM
oh **** dont tell me I went too small....its being coated right now.How is your performance?
Nah...you'll be fine I'm sure. Mine is coated as well...and it's purrrrty! I can't tell you the performance just yet. I hope to have it running by May, maybe sooner. I can tell you that I'm running a Half-BP motor and will be shooting for 450whp @ 15psi. https://www.nopistons.com/forums/pub...1047683473.gif |
| All times are GMT -5. The time now is 07:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands