Im stuck. I have a friend who put a T04B on his car and had a shop do it. I went to them and told them I was doing the same thing and wanted to know if I could get the same oil feed/return lines that he has.



Well, I got a feed line, but I dont know how to get it into my block! Do I need an adaptor or something? I saw this http://www.atpturbo.com/Merchant2/merchant...tegory_Code=FTG and thought about using it in conjunction with the stock banjo bolt that is there, but I dont know if its 14mm OR if my fitting is 1/4" NPT...



How did you all hook up your oil feed?

Either plumb it into the stock hard line, or you need an adaptor to bolt it to the iron housing. I think I have one at the shop I can take a pic of.

don't some people tap the port on the turbo NPT and just thread in a NPT to AN adapter? I coulda sworn I've seen pictures of that a number of times.

Hes talking about the feed "port" coming form the front iron. Easiest way is to plumb into the stock line as SN3 mentioned.

Even using the stock FC line?



I just dont see how...

THis adapters, one end with the reversed flared end to match the stock oil line?

http://turborotor.home.comcast.net/rx7/DSC00057.JPG

http://turborotor.home.comcast.net/rx7/DSC00059.JPG



Don't ask me https://www.nopistons.com/forums/pub...IR#>/smile.png Ask 13Bace, mine came with my kit i bought used.