NoPistons -Mazda Rx7 & Rx8 Rotary Forum - Need suggestion about single turbo

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)

- Single Turbo Discussion (https://www.nopistons.com/single-turbo-discussion-13/)

- - Need suggestion about single turbo (https://www.nopistons.com/single-turbo-discussion-13/need-suggestion-about-single-turbo-62195/)

xoazy

10-16-2006 09:48 AM

I wanna set up my car for Drifting. Now I am thinking about turbo. Which turbo is suit wtih my FD? I wanna tubo start spool up at about 2800 rpm and full boost around 3500-3800 rpm. Target HP is about 350-400 HP. Now my rotary is stock everything. Maybe in the future I would overhaul it and get street port.

Now I am thinking about 2 choices.

1. T04S for low cost(no BB) Please advice me for turbine A/R

2. GT35R for high cost(BB) Please advice me for turbine A/R

Thank you so much. I come from Thailand.

Nice to meet everyone.

NocH

Nospig

10-16-2006 06:08 PM

to4s .81-.84 gt35R (t3 turbine) 1.15

xoazy

10-16-2006 08:59 PM

Quote:

Originally Posted by Nospig' post='841074' date='Oct 17 2006, 06:08 AM

to4s .81-.84 gt35R (t3 turbine) 1.15

Can GT35R start spool up around 2800-3000 rpm with 1.15 turbine A/R? It seem to be too big.

Midnightdriver

10-17-2006 08:37 PM

I'm going to be using a T04E BB with 1.0 hotside which will give me about that range... turbo is 57 P trim on the intake.. But as stated before a T04S will give it to you also. For drift a .96 or 1.0 will do you fine. V-band with minimum of 3 inch exh.

Nospig

10-18-2006 03:09 PM

Im using a 62-1 t4 with .81 ptrim spools up from 2k but all action is after 4000 std fd block

All times are GMT -5. The time now is 10:38 PM.