This guy has a 60-1 hybrid like I do, so what gives? https://www.nopistons.com/forums/pub...#>/biggrin.png

same lookin thing to me. https://www.nopistons.com/forums/pub...IR#>/blink.png

well maybe im a tard, but my wheel looks way bigger.Even when i mearsure the wheel I was told it was too big to be a 60-1 wheel. The compressor housing can't even be position straight up like the other guys cuz the its too large.

60-1 is the largest housing that can be fit on the ht-18 turbine, it does look pretty damn big, could be a to4s wheel.



A 60-1 wheel has a 60mm diameter, how large was it when you measured it?

thats what I was told, a t04s wheel. I can't remember off hand but i remember the exducer was 3"

on a to4s the inducer is 4" and the exducer is 2.5", the wheel is a 60-1, 60mm

Here is a full to4s (probably the one i will buy), your compressor should look like this.

you mean 2.5 induc, 4 exd. Its definately not that big.

I think he means the intake size on the compressor is 4 inches and the outlet of the compressor is 2.5



i think standard 60-1 wheel size is around 2.3 inducer and 3.0 exd





James

i think you are right on the standard 60-1



and the inducer is the intake and the exeducer is the exit.