my turbo is huge but its just huge enough to be perfect for me https://www.nopistons.com/forums/pub...#>/biggrin.png
|
Overkill?
|
Actually it would be good for a half bridge race motor, maybe one day. Its on ebay for anyone who might be interested
|
do you have any other pics of the turbo? and any way I could talk you into taking off the
compressor housing and measure the compressor wheel? I have an HKS T45s turbo that is probably similar or the same thing as that. .72 a/r compressor but a .90 exhaust housing. HKS runs there own exhaust housings, and makes a custom part that fits in the front of the compressor housing. let me know if you want to sell it. I start making boost around 2100 rpm not much its pretty dead till at least 2500 rpm where it wakes up, full boost by 3500~3700 just kind of depends on where you start. My car is my daily driver and I love it it has plenty of low end around town. these pics are old when I was putting it on the car, running a diff manifold now. http://www.simplelain.net/turbo/regcomp.jpg http://www.simplelain.net/turbo/polishcomp1.jpg http://www.simplelain.net/turbo/0004.jpg Thanks, James |
I received one of those a week ago and have completed 99% of the install , I still need to finish modifying the oil return line ( problems clearing the very large compressor back plate ,)and making a new discharge elbow . Mine is a bit different in its configuration , it has a 0.6a/r comp. housing , 5" suction withe the diffuser ring in there too , 3" discharge , 76mm compressor wheel , 1.22a/r turbine housing , tangential and divided and 70.8mm turbine wheel .
That turbo is truly massive , one of the largest i've seen , it is sized to flow 92lbs/min of air (950-1000hp) , I would not reccomend it for street use unless you have some "special " porting done to your motor , mine is half bridged with large (no sleeve ) exhaust ports , I am also using a completely devided tubular exh. manifold to aid in spool up. |
That pic came off ebay. Some dude in Australia was selling it. So I can't take any measurements, sorry.
Just look at the lighter in the background that will give you a good idea as to how big that bitch really is |
All times are GMT -5. The time now is 10:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands