I need confirmation that I'm installing the silicone hoses from the greddy boost controller valve unit to the HKS wastegate the right way. I ran a hose from the COM port of the valve unit to the top fitting on the HKS wastegate. I then ran a two foot hose from the NO port on the valve unit and installed a tee fitting in there. One side of the tee went to the compressor side of the turbo and the other end of the tee went to the side port of the HKS wastegate.
|
All times are GMT -5. The time now is 01:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands