Fc Turbo Upgrade Help
#1
I own a 90 TII and have stock turbo for now and looking to upgrade soon. My current mods are...
Haltech E6K
Greddy fmic
Racing beat full exhaust
550/860 injectors
rotary works street port
port matched manifolds
blitz super sound BOV
Not sure on internal or external wastegate?
what turbo manifold?
what turbo?
If I go external waste then need advice on wastegate
Was looking at garrett gt25r turbo or some type of T3/T4
Any help is great
Haltech E6K
Greddy fmic
Racing beat full exhaust
550/860 injectors
rotary works street port
port matched manifolds
blitz super sound BOV
Not sure on internal or external wastegate?
what turbo manifold?
what turbo?
If I go external waste then need advice on wastegate
Was looking at garrett gt25r turbo or some type of T3/T4
Any help is great
#3
my price range is nothing too much, maybe for turbo, mani, wastegate nothing more than 2000. Car will be used daily for the most part. I use the car for track and some fun drifting and also like it to be fast in a straight too. So a good all arond car and not have a lot of lag.
Another thing is that i see turbo manifolds for the fc and they are all t4 flanges how would i accomidate the t3? Some form of adapter plate but how would I go about doing this?
Another thing is that i see turbo manifolds for the fc and they are all t4 flanges how would i accomidate the t3? Some form of adapter plate but how would I go about doing this?
#4
you'd have to have it build for a t3 flange however DON'T. As stated above a T3 hotside is TOO SMALL for a rotary unless its a GT3540 which happens to have a T3 flange. Keeping it under 2k, i'd say go with the HKS cast iron manifold, HKS wastegate, to4e or to4s turbo.