Anyone know?He says it bolts to the stock T2 manifold and its a garret.I hope someone know.I was thinking about it.
Thanks X |
if it bolts to the stock manifold its some sorta hybrid stock turbo
mike |
Can't realy identify without measurements, but looks like a T-04B/E mated to the stock rear. Similar to a hybrid turbo.
|
Originally Posted by jspecracer7' date='Aug 2 2003, 05:51 PM
Can't realy identify without measurements, but looks like a T-04B/E mated to the stock rear. Similar to a hybrid turbo.
|
Originally Posted by j9fd3s' date='Aug 2 2003, 05:50 PM
if it bolts to the stock manifold its some sorta hybrid stock turbo
mike |
Originally Posted by Racer X' date='Aug 3 2003, 12:38 PM
So it could be a TO4B hybrid?What type of power do you think this thing is good for?He's taking offers on it.
|
Originally Posted by jspecracer7' date='Aug 2 2003, 10:46 PM
you could probably get 300 to 350 to the wheels playing it conservative.
|
Originally Posted by Racer X' date='Aug 3 2003, 04:00 PM
Really?Damn.I think I might have to start bargaining with him tommorow.350whp would be nice in a First gen.https://www.nopistons.com/forums/pub...#>/biggrin.png
|
Originally Posted by jspecracer7' date='Aug 2 2003, 11:19 PM
I'm thinking 350 with a 13B with a big side port an proly 18 psi. Still, in a 1st Gen and a good running engine, expect at least 300. https://www.nopistons.com/forums/pub...1047683894.gif https://www.nopistons.com/forums/pub...IR#>/boink.gif
|
300 is a very nice figure
|
That's a T04E compressor housing. 6 blade 6 splitter = T04E. 7 blade 7 splitter = T04B. The trim of the blade is most likely 60 but it could be a 57.
|
Originally Posted by Rutt' date='Aug 8 2003, 01:36 AM
That's a T04E compressor housing. 6 blade 6 splitter = T04E. 7 blade 7 splitter = T04B. The trim of the blade is most likely 60 but it could be a 57.
|
Yes, it's called a "high flow" over here. People commonly get 300~350whp with the right tuning, boost and port.
|
Cool.I might have to get it.He said he has a manifold that goes with it.
|
What do you think this hybrid could put out at 10 psi?Thanks for your help rutt
|
I would guesstimate about 250~280whp but port type, DP size, exhaust size, injectors, and tuning will be the major factors for HP production.
|
For now it'll be stock port(Till it blows) with 960CC injectors(Still need RC to bore them)with 2.5" DP and 3" straight thru exhaust. https://www.nopistons.com/forums/pub...#>/biggrin.png They guy said he wants $500 for it with a manifold.I'm thinking about it.
|
All times are GMT -5. The time now is 02:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands