RX-7 & RX-8 Parts For Sale & Wanted Post Parts For Sale or Wanted.

Parting out 93 FD

Thread Tools
 
Search this Thread
 
Old Nov 8, 2005 | 10:57 AM
  #1  
Outlaw357mag's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2005
Posts: 4
Default

Howdy all im parting out a 93 FD. I know yall are going to say that im a newbie and all but im a legit guy. I have been posting over at RX7club.com and thought i would give yall a shot at the parts im getting rid of. I would put up links to my good guy/bad guy review and my parts thread. TIm not trying to make enemies here or anywhere else the 15 folks who have bought off of me have been satisfied with my shipping times and legitimacy, but im not linking out holding to the forum rules you can check me out in the seller ratings and find my post under my sreen name over at RX7club. The following is a list of what i have left hit me up at my E-mail Da357magnum@comcast.net or PM me ill try to respond as fast as possible. Im willing to negotiate and provide any information that yall want. Ill post pics of what i have left.

Your buddy Patrick





Engine:



Pettit Cool Charge III: 1000 shipped

With 900 CFM pull fan and red couplers and all the hardware.



Polished Hard intake pipes and filters: 100



Polished Blitz intake: 185



Bltiz turbo timer: 50



Stock oil cooler: got idea make offer



RotaryXtreme Polised battery holder and bettery:120



Drive-Shaft: 100



PowerPlant Frame: 100 never cracked



Prolite-Flywheel: 190

Counter Weight included.



5spd Tanny: 200

5th gear synchro bout gone



Pineapple Racing Street Ported block: 1750

a few of the extras in good condition

can provide information on what was done.



Cosmo 13b stock turbos?: got in trade make offer

good condition



Airpump:35



Powersteering pump: 35



Oil pump: 60



Pettit Underdrive pulley: 150



Stock y-pipe: 20

LIM: 50

All 3 coil packs: Make offers

Rats nest and all Solenoids: Make offers



Stock Primary injectors and rail: 75

Secondary Rail

Engine Wiring Harness: make offer

High milage brittle plastic good connectors .

Stock ecu: 50





EXHAUST:

Have a/v of it installed

Pettit 3" Downpipe: 210



HKS Carbon Ti catback: 350



BODY:



This stuff is VR and in good condition



Front Bumper: 175



Fenders Pair: 200



Flip Light Motors pair or individual: 100/50



Stock fog lights: 80
Old Nov 8, 2005 | 12:23 PM
  #2  
base94montego's Avatar
Senior Member
 
Joined: Jul 2005
Posts: 155
From: Fairfax Co., VA
Default

How much did you want for the 5 speed transmission>?
Old Nov 8, 2005 | 12:36 PM
  #3  
Outlaw357mag's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2005
Posts: 4
Default

Originally Posted by base94montego' post='776611' date='Nov 8 2005, 01:23 PM

How much did you want for the 5 speed transmission>?
Looking to get 200 but that doesnt include shipping, ill have to look into that. I gotta find out an approximate weight. Its in good condition other than the 5th gear synchro is about gone grinds a bit but i never used it anyways.
Old Nov 8, 2005 | 02:27 PM
  #4  
base94montego's Avatar
Senior Member
 
Joined: Jul 2005
Posts: 155
From: Fairfax Co., VA
Default

Originally Posted by Outlaw357mag' post='776617' date='Nov 8 2005, 01:36 PM

Looking to get 200 but that doesnt include shipping, ill have to look into that. I gotta find out an approximate weight. Its in good condition other than the 5th gear synchro is about gone grinds a bit but i never used it anyways.
I see, because I have an auto, and was thinking about converting, do you know how much labor and cost goes into the conversion?
Old Nov 8, 2005 | 02:55 PM
  #5  
Outlaw357mag's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2005
Posts: 4
Default

Originally Posted by base94montego' post='776652' date='Nov 8 2005, 03:27 PM

I see, because I have an auto, and was thinking about converting, do you know how much labor and cost goes into the conversion?
Well i know what you would need im sure there are others on here who could give you an more approximate number. Try searching. I know you need the trany of course clutch master and slave cylinder, appropriate clutch and flyhweel and counter weight. The hydraulic lines and fittings. Clutch pedal etc.... like i said i would try searching but i would say all and all around 1500-2000 depending on parts used and quality, whether you use new or used parts. I got the tranny, an RPS clutch not sure about the disk though may be damaged im gonna have it checked out. Prolite flywheel and counter weight and a short shifter. My hydraulics are staying. If you need little parts try mazdatrix.com and ther are someothers hopes this helps. let me know if you need naything else from me.

Patrick
Old Nov 10, 2005 | 08:45 AM
  #6  
Outlaw357mag's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2005
Posts: 4
Default

To give an update the midpipe and radiator are gone. I have a polished manifold available that a buyer ened up backing out on so its up for grabs here are some pics. im letting it go for 125 shipped.
Old Nov 15, 2005 | 02:40 AM
  #7  
Ricer240sx's Avatar
Senior Member
 
Joined: Jan 2004
Posts: 364
From: Green Bay, WI
Default

location?
Old Nov 15, 2005 | 03:06 AM
  #8  
sweet7's Avatar
Senior Member
 
Joined: Jun 2003
Posts: 1,430
From: Stacked outside you're trailer door
Default

Dont wanna sell you're sleek headlights do ya?
Old Nov 15, 2005 | 09:55 PM
  #9  
rotary632's Avatar
Senior Member
 
Joined: Sep 2003
Posts: 186
Default

Originally Posted by Outlaw357mag' post='777253' date='Nov 10 2005, 06:45 AM

To give an update the midpipe and radiator are gone. I have a polished manifold available that a buyer ened up backing out on so its up for grabs here are some pics. im letting it go for 125 shipped.


Do you have the throttle body and lower manifold? How much of a discount for all three? e-mail me alex@americarepro.com



Thnx
Old Nov 16, 2005 | 03:23 PM
  #10  
twomuchboost4u's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 23
Default

I need your tranny ASAP dont have very much computer access so call me at 408 230 9377. Ask for Chris



All times are GMT -5. The time now is 01:51 PM.