Fs: 87 Na Parts
01-16-2003, 01:53 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: IL
Posts: 2,930
I have some 87 NA parts for sale, these include front and rear rotor housings, front, rear, and intermediate housings. I also have the stationary gears and one rotor (2nd has turned into a cubicle decoration). If I can't sell em to someone who will put them to use they will likely end up in the trash, this motor was dismantled due to oil control ring failure, not detonation or apex seal failure, so the housings arent too bad. The motor had 100k miles.
Stationary gears look fine, rotor has some carbon deposits, and all the housings are in the same condition they were in at disassemble (not cleaned) this is probably a good thing as it means they still have oil/grease all over them preventing corrosion sitting in the garage.
PM me if interested, I don't know what price is reasonable for these used parts, shipping might be expensive since the irons are pretty heavy. I can take pics this weekend.
BTW, these are stock port housings, no modifications have been done.
Stationary gears look fine, rotor has some carbon deposits, and all the housings are in the same condition they were in at disassemble (not cleaned) this is probably a good thing as it means they still have oil/grease all over them preventing corrosion sitting in the garage.
PM me if interested, I don't know what price is reasonable for these used parts, shipping might be expensive since the irons are pretty heavy. I can take pics this weekend.
BTW, these are stock port housings, no modifications have been done.
01-22-2003, 11:04 AM
#2
Senior Member
Thread Starter
Join Date: Apr 2002
Location: IL
Posts: 2,930
I took some pictures real quick this morning of the housings and some other things in the garage, it's all for sale, all out of a S4 FC NA. The power steering pump worked fine before I removed it.
both of the rotor housings are pictured, I took one group photo of all the engine parts I have left, theres a full set of S4 tension bolts that are in good condition also... counterweights, I also have the stock stationary gears but I forgot to photograph them, they are in good shape. I didnt get to take photographs of the side housings, didnt want to get dirty before going to work.
http://www.pengaru.com/~swivel/cars/rx-7/forsale/
these are all as they were when the engine was disassembled, no cleaning has been done... everything is in pretty decent shape as far as I can tell.
both of the rotor housings are pictured, I took one group photo of all the engine parts I have left, theres a full set of S4 tension bolts that are in good condition also... counterweights, I also have the stock stationary gears but I forgot to photograph them, they are in good shape. I didnt get to take photographs of the side housings, didnt want to get dirty before going to work.
http://www.pengaru.com/~swivel/cars/rx-7/forsale/
these are all as they were when the engine was disassembled, no cleaning has been done... everything is in pretty decent shape as far as I can tell.
01-22-2003, 11:44 PM
#4
Senior Member
Thread Starter
Join Date: Apr 2002
Location: IL
Posts: 2,930
nope, no driveshaft. Basically just an S4 NA motor in parts, except for the eccentric shaft, no rotors, and the front cover has some stripped holes so it's not useful. I do have the rotors but one is a cubicle decoration right now and the other a friend wants for the same purpose.
Thread
Thread Starter
Forum
Replies
Last Post
Luke_Tech
RX-7 & RX-8 Parts For Sale & Wanted
0
05-17-2007 01:16 AM
Mikwon
RX-7 & RX-8 Parts For Sale & Wanted
0
07-15-2003 10:48 PM
rbrtech
RX-7 & RX-8 Parts For Sale & Wanted
0
11-23-2002 02:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)